Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Top Knobs bar pull from the TK Series is a contemporary cabinet pull for narrow drawer fronts, door edges, and smaller cabinetry where a longer pull would overwhelm the front. Finished in Honey Bronze and mounting on 3 inch (76 mm) centers, it fits the most common short-spacing hole pattern found in kitchens, baths, and built-ins.
The 3 inch center-to-center is the short end of the standard pull-spacing range, and it has a specific job: narrow drawer fronts on spice banks, false drawer fronts, small upper doors, and bathroom vanity drawers where a longer pull would run edge to edge and look wrong. On a replacement project drilled to this spacing, the pull drops onto existing holes with no additional work at the bench or on the wall. That makes the spacing the first thing to confirm, and it is worth measuring the existing hole centers before ordering rather than assuming from the door width alone.
The pull is made from steel, which provides a stable substrate for the Honey Bronze finish. Honey Bronze sits in the bronze tone family but reads as a warmer, slightly amber-tinged bronze rather than a flat dark brown or a bright oil-rubbed effect. Under kitchen or bathroom lighting it picks up a warmth that pairs naturally with wood cabinetry in stained or painted finishes. The 3/8 inch bar section is slim, which keeps the profile linear and unobtrusive on a small front.
This pull suits cabinet shops and designers running a warm metal program through a kitchen or bath where smaller fronts need hardware scaled to match. It is also a practical choice for a homeowner replacing hardware on a bank of narrow drawers already drilled to 3 inch centers. The Bar Pulls TK Series spans multiple center-to-center sizes in the same Honey Bronze finish, so larger pulls on wide drawer fronts and doors can be drawn from the same series and finish to keep the hardware program consistent through the whole room.
The pull is 3-3/4 inches end to end but mounts on 3 inch centers. The mounting holes are 3 inches apart; the extra 3/4 inch is the overhang of the bar beyond the posts on each side. Drill or match to the 3 inch figure, not the overall length.
The source data does not specify the application method. What it confirms is the finish name and that the base material is steel.
Yes. A bar pull mounts on two through-holes regardless of whether the front is a door or a drawer. The 3 inch spacing is common on small upper doors and vanity doors as well as narrow drawers.
The Bar Pulls TK Series is available in multiple center-to-center sizes in Honey Bronze, so pulls on wider fronts can be drawn from the same series and finish. Confirm the series name and finish value on each SKU before ordering.
When the front is small and the hole spacing is 3 inches, this pull delivers the right proportion and a finish warm enough to anchor a bronze hardware program across the whole room.
Sold In: 1 Each