Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Top Knobs bar pull from the TK Bar Pulls series is a steel bar pull in Flat Black, mounting on 18-7/8 inch (480 mm) centers for oversized drawer fronts, pantry doors, and tall cabinet panels where standard pull lengths leave the hardware visually undersized.
Most cabinet pulls are sized for standard 3 to 6 inch drawer fronts, and they simply disappear on anything wider. A pantry door running 18 to 24 inches wide, a deep pot-and-pan drawer, a tall oven-column panel, or a bank of wide base drawers in an island all call for hardware at this scale. The 18-7/8 inch center-to-center puts the mounting holes far enough apart that the pull spans the front intentionally rather than sitting centered like a small accent. On a flat slab or shaker front the long horizontal bar reinforces the geometry of the cabinetry, especially when the same profile is running consistently across the rest of the kitchen at shorter spacings.
The pull is manufactured from steel, which gives a bar at this length the rigidity to hold its line without flex. Flat Black is a no-gloss black that stays uniform under kitchen lighting and does not pick up reflections along the bar the way a polished or satin surface would. Against white, gray, navy, or natural-wood fronts the finish reads as a sharp graphic contrast. Against black or very dark cabinetry it recedes and lets the door profile carry the detail. Either way the finish handles marks and daily contact without the high-maintenance attention a mirror-polished surface demands.
Designers specifying a contemporary kitchen with a black hardware program will find this pull coordinates within the Top Knobs Bar Pulls TK series, where companion pieces in the same profile and finish cover shorter center-to-center spacings for the rest of the cabinet run. Cabinet shops building wide furniture-style islands or integrated refrigerator columns can use this to hardware panels that standard pulls are too short to read on. Homeowners replacing hardware on a pantry or a tall pantry-style door get a pull that is proportioned to the scale of the front rather than scaled to a standard drawer. This pull is for interior cabinetry. Steel with a painted finish is not rated for exterior or high-humidity applications.
18-7/8 inches (480 mm) is the center-to-center spacing, the distance between the centers of the two mounting holes. Overall length is 19-1/4 inches (489 mm). Drill to 480 mm on center.
The bar is 1/2 inch (12.5 mm) wide in a slender profile, designed to read as a horizontal line on the front rather than as a heavy grip.
The Top Knobs Bar Pulls TK series is available in multiple center-to-center spacings in the same bar profile and Flat Black finish, so the hardware can run consistently across the full cabinet program at whatever spacing each front requires.
A flat, no-gloss finish shows marks less readily than a polished surface and wipes clean easily. It is a practical finish choice for frequently used drawer and door hardware.
Choose this pull when the cabinetry is wide enough that standard hardware looks borrowed from somewhere smaller, and the black hardware program needs a bar pull that spans the front with intention.
Sold In: 1 Each