Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Top Knobs Princetonian bar pull is a contemporary steel bar pull that mounts on 6-5/16 inch (160 mm) centers, a spacing that suits wide base drawers, full-height pantry doors, and large upper cabinet doors where a shorter pull would look undersized.
The 6-5/16 inch (160 mm) center-to-center dimension is a widely used hole pattern on wider cabinet fronts. It appears most often on base drawers that span 18 inches or more, on full-height pantry and utility cabinet doors, and on furniture-scale islands where a pull in the 3 inch or 5 inch range would read as too small for the front it sits on. If you are replacing existing hardware, confirm the distance between the centers of your current holes before ordering. If you are specifying for new construction, 160 mm is a standard drilling template available from most jig manufacturers.
The pull is constructed from steel and finished in Honey Bronze. Honey Bronze occupies the middle of the bronze tone family: warmer and more amber than an oil-rubbed bronze, but without the gold intensity of a polished or satin brass. On painted cabinetry it reads as a distinct warm accent; on stained wood it blends into the grain without fighting it. The slim 3/8 inch bar section keeps the profile refined even at this length, so the pull adds hardware weight to the front without widening the visual footprint.
This pull fits naturally in a kitchen, bath, or pantry where the cabinetry runs wide and the hardware program is bronze tone. It suits designers specifying a transitional or contemporary interior where the hardware should read warm without committing to a full brass palette. Cabinet shops outfitting wide drawer banks will find the 160 mm spacing drops onto standard wide-format drilling templates cleanly. For homeowners replacing existing hardware at 160 mm centers, this pull is a straightforward swap that adds a bronze finish note to a kitchen that may currently be running a neutral or silver-tone hardware set. Companion knobs, pulls, and backplates in the Bar Pulls series are available in the same finish for a coordinated installation across doors and drawers.
Center-to-center, 6-5/16 inches (160 mm), is the distance between the centers of the two mounting holes and is the dimension you match to your existing holes or your drilling template. Overall length, 7-1/8 inches (181 mm), is the end-to-end size of the pull and tells you how much space it occupies on the front. The two numbers are always different on a bar pull.
The projection is 1-1/2 inches (38 mm) from the face of the door or drawer front to the back of the bar, which gives comfortable clearance for four fingers behind the grip.
Honey Bronze is a mid-sheen finish. It is neither the high gloss of a polished brass nor the flat texture of a matte black. It sits between those extremes with a warm, slightly lustrous tone.
Coordination within the Bar Pulls series is reliable because the pieces share the same finish and design language. Matching to a different Top Knobs series in Honey Bronze may produce a similar look, but finish consistency across series is not guaranteed, so ordering a sample before committing is a sound approach on a larger project.
When the fronts are wide and the hardware program calls for bronze, this pull delivers the correct mounting geometry and a finish that stays warm without going bright.
Sold In: 1 Each