Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Top Knobs Princetonian bar pull is a contemporary steel pull for cabinet doors and drawer fronts, mounting on 5-1/16 inch (128 mm) centers in Oil Rubbed Bronze.
The 5-1/16 inch (128 mm) center-to-center is the standard spacing for mid-size drawer fronts and upper cabinet doors. It sits between the compact 3-3/4 inch pattern common on smaller drawers and the wider 6-5/16 inch spacing used on deep base drawers. In practical terms, it suits a 15- to 24-inch drawer front, a standard-width upper door, or a vanity drawer where a smaller pull would look undersized. If the existing holes are drilled to 128 mm, this pull drops on without touching the drill.
The pull is made from steel and finished in Oil Rubbed Bronze. Steel gives the pull a density that zinc-based hardware at the same size does not always match, and the bar reads as a solid object rather than a lightweight fitting. Oil Rubbed Bronze is a dark, multi-tonal finish: the base is a deep brown-black with warmer bronze tones reading through it, particularly on raised edges and high-contact areas where the finish develops character over time. It does not behave like a flat painted black, and it does not behave like a polished brass. Against natural wood, painted fronts, or a dark stain it reads as a warm dark metal rather than a graphic contrast element.
This pull suits a kitchen, bathroom, or built-in project where the hardware finish is Oil Rubbed Bronze and the hole pattern is already at 128 mm. It is a practical choice for a remodel replacing existing hardware without re-drilling, and an equally good one for new construction where 128 mm is the specified center-to-center across the cabinet run. The slender 3/8 inch bar keeps the profile quiet on a shaker or raised-panel door, while the 1-1/2 inch projection gives enough clearance to grip without a knuckle catching the door face. Designers and cabinet shops specifying a full kitchen in the Bar Pulls collection will find matching pieces at other center-to-center values and in companion knobs within the same series.
The pull measures 5-13/16 inches (148 mm) end to end. The 5-1/16 inch (128 mm) figure is the center-to-center hole spacing, which is smaller than the overall length.
Top Knobs does not specify a lacquer or seal coating in the source data for this SKU. Oil Rubbed Bronze finishes are typically applied and may develop light variation in high-contact areas over time, which is characteristic of the finish.
The Top Knobs Bar Pulls collection includes companion knobs in Oil Rubbed Bronze. Using pulls on drawers and knobs on doors from the same series is the standard way to carry a consistent hardware program through the room.
The pull mounts through the front with machine screws. Screw length needs to suit the actual front thickness. The source data does not specify included screw length, so confirm the fastener before ordering if the front is thicker than standard.
When the project calls for 128 mm centers in Oil Rubbed Bronze, this pull resolves the hardware selection without compromise on either dimension.
Sold In: 1 Each