Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Top Knobs Barrington Channing pull is a contemporary bar pull that mounts on 5-1/16 inch (128 mm) centers, a spacing that lands squarely in the range most often specified for mid-size base drawers and standard upper cabinet doors.
The 5-1/16 inch center-to-center is one of the more common mid-range hole patterns in production cabinetry, and it appears frequently on drawer banks in the 18 to 24 inch width range as well as on standard upper doors. If the existing holes in a kitchen are already drilled to this spacing, this pull drops onto them without modification. For new work, 128 mm centers give the pull enough spread to feel intentional on a mid-width front without requiring a wide grip to bridge the gap. At 6-3/8 inches overall, the Channing extends an inch beyond its mounting points on each side, which softens the bar's termination and gives the pull a more finished look than a pull that ends directly over its screws.
Umbrio is a dark, warm bronze-toned finish with low reflectivity. On a bar pull with a narrow 9/16 inch section, that matters: a polished or high-sheen finish would catch kitchen light along the full length of the bar and pull the eye toward the hardware. Umbrio does the opposite. It holds an even, muted tone across the grip that keeps the cabinetry, not the pulls, as the primary visual element. The zinc base takes the finish evenly across the bar and posts, with no tonal variation between the grip and the mounting points. Against painted fronts in warm whites, grays, or deep colors, Umbrio reads as a quiet accent rather than a contrast detail.
Cabinet shops specifying hardware for transitional and contemporary kitchens will find the Barrington Channing a practical anchor piece: the 128 mm center-to-center covers a high volume of standard drawer and door applications in one SKU. Designers assembling a hardware program that needs to stay understated will appreciate Umbrio's ability to coordinate without competing with unlacquered brass fixtures, aged bronze faucets, or flat-black accents already in the space. Homeowners replacing worn or mismatched hardware on a kitchen drilled to 5-1/16 inch centers can use this as a straightforward swap. The Barrington collection provides matching knobs and companion pulls at other center-to-center spacings, so it is possible to run a consistent hardware program across doors and drawers of varying widths from the same series.
5-1/16 inches is 128 mm, while 5 inches is 127 mm. The two are not the same hole pattern and are not interchangeable. If your existing holes are drilled to 5 inch centers, measure carefully before ordering this pull.
Umbrio is a dark bronze-tone finish, not a true black. It sits in the Bronze Tone color family and reads as a very dark, warm brown under most lighting rather than as a neutral black.
Yes. A bar pull at this size works on both upper and lower cabinet doors as well as drawer fronts. The 5-1/16 inch center-to-center is common on door hardware in this range.
Yes. The Barrington series includes companion knobs and pulls in the same finish and design language, so doors and drawers can be fitted from one collection.
For any installation where 5-1/16 inch centers are already in the plan or already in the door, this pull arrives at the right spacing, in a finish that keeps the hardware honest and lets the cabinetry carry the room.
Sold In: 1 Each