Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Top Knobs Barrington pull is a contemporary bar pull for cabinet doors and drawer fronts, centered at 9 inches (229 mm) for fronts that demand hardware at a matching scale.
At 9 inches center-to-center, this pull is sized for the moments where a smaller pull would look lost. Wide base cabinet drawers, often 24 inches or wider, look underfurnished with a 3 or 4 inch pull. A pantry door or a tall cabinet front presents the same problem: the hardware should have some visual weight to balance the front's height and width. This pull also lands naturally on a spice drawer bank or a pot-and-pan drawer where a longer grip span gives more control over a heavy load without requiring a perfect two-finger pull point. The 12-15/16 inch overall length leaves enough clearance from each end of the front to look deliberate rather than crowded.
The pull is cast in zinc and finished in Flat Black, which is a distinct finish from Matte Black. Flat Black carries no sheen at all, producing a surface that reads as a pure, consistent tone regardless of the angle the light hits it. That flatness matters on a pull at this length: a polished or even a satin surface reflects along its span and draws the eye down the bar, while a flat surface holds its place in the composition. Against white, gray, or natural-wood cabinetry it anchors the hardware program without competing with the fronts.
This is the right pull for a kitchen or bath renovation where the design calls for bold hardware at a scale that matches oversize drawer fronts and full-height cabinet doors. Cabinet shops building wide drawer banks for a contemporary kitchen will find the 9 inch spacing a natural fit for fronts in the 18 to 30 inch range, and the Barrington collection gives them a coordinated path to companion knobs and shorter pulls on the rest of the run. Designers specifying a complete hardware program in flat black will find the collection keeps a unified geometry across every piece. Homeowners replacing existing hardware drilled at 9 inch centers can drop this pull onto the existing holes without modification.
Flat Black is a fully non-reflective surface with no sheen at any angle. Matte Black carries a slight sheen that becomes visible in direct light. These are two distinct finish values and are not interchangeable across orders.
It is less common than 3 or 3-3/4 inch spacing but is a recognized standard for wide drawers and large cabinet fronts. If you are replacing hardware, measure between the centers of your existing holes before ordering.
Yes. At nearly 13 inches overall, it suits both a wide drawer front and a full-height cabinet door where a horizontal or vertical bar orientation works with the door's proportions.
Yes. The Barrington series from Top Knobs includes companion knobs and pulls at multiple center-to-center sizes in the same design language and finish, so you can run a coordinated program across doors and drawers.
When the fronts are wide and the design is contemporary, this Barrington pull in Flat Black gives the hardware program the span and the finish depth to hold its own across the full run of cabinetry.
Sold In: 1 Each