Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Top Knobs Barrington pull is a contemporary bar pull for cabinet doors and drawer fronts, sized to the 3-3/4 inch center-to-center spacing that appears more often than any other in residential cabinetry.
A kitchen going in today and a kitchen built fifteen years ago are very likely to share the 3-3/4 inch hole pattern. It is the spacing that production builders default to, that semi-custom shops use for mid-size drawers, and that most replacement hardware is designed around. A pull on these centers drops onto existing holes without any new drilling on a standard drawer bank, which is why this spacing is the one to reach for first when the goal is a hardware swap without a trip to the router table. At 5-1/8 inches end to end, the pull is proportioned to read well on a 15- to 18-inch drawer front, where the hardware should have some visual presence without dominating the face.
Honey Bronze is not a dark antique bronze and it is not a bright polished brass. It sits in the amber range of the bronze family, warm enough to read gold in some lights and brown in others, which gives it a flexibility that a single-note finish does not have. The surface has some depth to it rather than lying flat, so it picks up the light differently across the bar than a uniform polished finish would. Against painted fronts in white or warm off-white, it reads as the accent. Against a stained wood front, it pulls from the same warm register as the grain. The pull is cast in zinc, and the Honey Bronze finish is the top coat over that substrate, not a statement about the base metal.
This pull is well suited to a transitional or contemporary kitchen where the hardware needs warmth without going full traditional. Honey Bronze lands easily in a space that already runs warm metals at the faucet or the light fixtures, and the slim bar profile keeps it from feeling heavy or ornate. It also works for a renovation where the existing holes are already at 3-3/4 inches and the goal is to upgrade the finish without modifying the doors. Cabinet shops specifying for a production run or a multi-unit project can rely on the 3-3/4 inch spacing to be the right fit across a wide range of standard drawer configurations. The Barrington collection extends into matching knobs and other pull sizes, so a mixed-hardware kitchen, knobs on doors and pulls on drawers, stays within one design language.
Yes. The 3-3/4 inch spacing is the same standard cabinet hole pattern whether it is labeled 95 mm or 96 mm in a catalog. Both refer to the same drilling and the same pull will fit either.
The overall length is 5-1/8 inches end to end. The center-to-center is 3-3/4 inches, which is the hole spacing you match to your existing drilling. The pull extends beyond its mounting holes by about 11/16 inch on each side.
Honey Bronze is Top Knobs' own finish name and is not guaranteed to match a finish of the same or a similar name from another manufacturer. For a coordinated look, stay within the Barrington collection or confirm samples before specifying across brands.
If your existing drawers are drilled at 3-3/4 inch centers, this pull mounts directly onto those holes. Measure between the centers of your existing holes to confirm before ordering.
When the hole pattern is already there and the hardware just needs to be better, this Barrington pull in Honey Bronze is the answer that fits without a second thought.
Sold In: 1 Each