Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Top Knobs Chareau series pull is a D-profile cabinet pull that mounts on 6-5/16 inch (160 mm) centers, a spacing that suits wide drawers, full-height pantry doors, and other large cabinet fronts where a shorter pull would look undersized.
The 6-5/16 inch spacing is a wide-format mounting that belongs on fronts where shorter hardware reads as too small. Wide base drawers holding pots and heavy items, two-door pantry and tall cabinet pulls, and large furniture-style drawer banks are all situations where this center-to-center distance gives the pull the visual reach to match the front it sits on. It is also the right spacing for a direct replacement on any existing cabinet already drilled to 160 mm centers, which is a standard dimension on many European and semi-custom cabinet lines. No new holes, no patching, no drama.
The pull is cast in zinc and finished in Polished Chrome. Chrome at this level of polish is a mirror-bright surface that runs as a continuous highlight along the D-bar and across the posts. It is the finish that coordinates most directly with chrome faucets, stainless appliance trim, and polished light fixtures, so a chrome pull sits with what is already in the room rather than introducing a second metal. The zinc casting gives the pull its form with consistent wall thickness through the curve and into the posts.
This is a pull for a traditional or transitional kitchen, bath, or built-in where the fronts are wide enough to call for 160 mm hardware and the fixture finish is chrome or polished stainless. Designers specifying a full kitchen with mixed drawer widths will typically pair this spacing with shorter pulls from the same Chareau collection on narrower drawers and matching knobs on doors, keeping the finish program consistent while the center-to-center scales up with the front. For a cabinet shop or contractor replacing hardware across a full kitchen, the 160 mm spacing is worth confirming against the existing hole pattern before ordering.
Yes. 160 mm converts to approximately 6-5/16 inches, and both values refer to the same standard spacing used on many European-style cabinet lines.
Center-to-center is the drilling dimension: 6-5/16 inches between the two mounting holes. Overall length is 6-7/8 inches, which is how far the pull extends end to end. The overall length is always larger than the center-to-center distance.
A mirror-polished surface will show smudges more readily than a brushed or matte finish, and wipes clean just as easily with a soft cloth.
The Chareau collection includes companion pieces in the same design language and finish, so you can build a consistent hardware program across different front sizes.
When the front is broad and the fixtures are polished, this pull covers the spacing, holds the proportion, and keeps the hardware program in a single metal.
Sold In: 1 Each