Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Top Knobs Cobblestone pull is a contemporary bar pull for cabinet doors and drawer fronts, mounting on the 5-1/16 inch (128 mm) center-to-center spacing that defines the mid-range of standard kitchen cabinetry.
The 5-1/16 inch (128 mm) center-to-center dimension is the critical number here. On a replacement project, this is the measurement between the centers of the two existing holes in the door or drawer front, and a pull drilled to that spacing mounts without touching a router or a drill. On new construction, 128 mm is one of the two or three hole spacings a shop will cut across an entire run of cabinetry, which means this pull works across base drawers, upper doors, and furniture-style islands without requiring a separate drill pattern for each. The 5-7/8 inch overall length gives the pull visual scale beyond the holes themselves, so the hardware reads proportionally on fronts from about 12 inches wide on up.
The Cobblestone pull is made from solid brass, which is less common in this category than zinc and carries a different character in the hand. Polished Brass is a bright, reflective surface with warm yellow-gold tones, and it is produced here on a substrate that holds a crisp edge rather than a cast softness. The finish is highly reflective, which means it picks up the ambient color of the room around it. In a kitchen with warm wood tones or cream paint, the pull will read as a genuine gold accent. In a cooler or more neutral kitchen, the brass becomes the warmest note in the space. Polished Brass belongs to the Gold Tone color family and coordinates with other warm-metal fixtures without requiring an exact match.
This is the right pull for a traditional, transitional, or contemporary kitchen where the design calls for a warm metal accent and the cabinetry is already drilled or will be drilled to 128 mm centers. Cabinet shops running production kitchens with a standard hole pattern will find this spacing compatible across a full door and drawer program. Designers specifying a mixed hardware set can pair this pull on drawers with a Cobblestone knob on doors, keeping the collection consistent. Homeowners replacing hardware on existing cabinetry drilled to 5-1/16 inch centers can swap to this pull without any new drilling.
Solid brass. The Material Type attribute for this SKU confirms brass construction, which is the less common base material in this segment.
The 5-1/16 inch (128 mm) figure is the distance between the centers of the two mounting holes. The pull measures 5-7/8 inches end to end overall. Drilling or matching holes to the 5-1/16 inch dimension is correct; the overall length is a size figure, not a drilling figure.
A highly polished surface shows marks more readily than a brushed or satin finish does, and wipes clean just as readily with a soft cloth.
Yes. The Cobblestone collection includes companion knobs and other pull sizes in the same design language and finish, so you can run a consistent hardware program across doors and drawers.
Choose this pull when the cabinetry is drilled to 5-1/16 inch centers and the finish call is Polished Brass: it mounts without modification and brings solid brass construction to a spacing that fits a full kitchen run.
Sold In: 1 Each