Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Top Knobs Dakota M1750 is a traditional bar pull that mounts on 3-inch (76 mm) centers, a size that moves comfortably between narrow drawer fronts and upper cabinet doors without dominating either one.
Three-inch center-to-center is the smallest standard two-hole spacing in residential cabinet hardware, which makes it the natural fit for narrow fronts where a larger pull would run edge to edge. It lands on upper door stiles that are not wide enough to carry a 3-3/4-inch pull cleanly, on spice drawers and tray pulls beside a range, and on the secondary drawers in a vanity bank. It is also the go-to spacing when a single kitchen mixes two center-to-center sizes: pulls on the wide base drawers in a longer spacing, pulls on the shallower upper drawers and doors at 3 inches. Both sizes can run from the same Dakota collection.
The pull is cast in zinc and finished in Brushed Bronze. The brushed surface breaks the reflectivity of the bronze tone and produces a finish that is warm without being flashy. In most lighting conditions it reads closer to an aged or oiled bronze than to a polished brass, which is why it tends to sit well in traditional and transitional rooms that already carry oil-rubbed fixtures or unlacquered brass. The finish is consistent across the Dakota collection, so companion knobs in the same series will match without the variation that can appear when mixing bronze tones across brands.
This pull is a straightforward choice for a traditional or transitional kitchen, bath, or built-in where the existing hardware runs in the 3-inch hole pattern and the finish direction is bronze. It suits a full hardware refresh on frameless or face-frame cabinetry alike, and because the Dakota collection spans knobs as well as pulls, it is practical to run knobs on doors and this pull on drawers without introducing a second design language. Cabinet shops doing production runs and homeowners replacing a matched set will both find the 3-inch spacing easy to work with on standard residential stock.
Center-to-center is 3 inches (76 mm), which is the distance between the centers of the two mounting holes and the number you match to your existing holes or drill to when installing new hardware. Overall length is 4-3/4 inches (121 mm), which is the full end-to-end size of the pull. The two numbers are not interchangeable.
Brushed Bronze is a warm, low-gloss finish with a similar tone to oil-rubbed bronze, and many designers use them together. That said, finish names are not standardized across manufacturers, and two products described with similar names are not guaranteed to match. Compare samples when a close match matters.
Yes. The Dakota collection includes companion knobs in the same design language and finish, so the hardware can be coordinated across doors and drawers within one series.
The projection is 1-7/16 inches (37 mm) from the face of the door or drawer front to the back of the grip.
Choose this pull when the job calls for a 3-inch spacing, a warm brushed bronze finish, and a traditional bar profile that coordinates cleanly across a full cabinet run.
Sold In: 1 Each