Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Top Knobs Devon pull is a transitional bar pull that mounts on 6-5/16 inch (160 mm) centers, a spacing that suits wide base drawers, pantry fronts, and taller upper doors where a shorter pull would look underscaled.
A 6-5/16 inch center-to-center is not the most common hole pattern in a kitchen, and that is exactly what makes it useful. Wide base drawers, deep drawer banks, and full-height pantry doors are the fronts where a tighter pull looks like an afterthought. At 160 mm the hardware spans enough of the front to feel intentional rather than undersized. It also lands on many existing hole patterns in mid-range and upper-tier cabinetry, so a drawer bank already drilled to this spacing takes this pull without touching a drill press.
Umbrio is a dark bronze-tone finish in the Top Knobs catalog, with more shadow and complexity than a standard oil-rubbed bronze and more warmth than a flat matte black. Cast in zinc, the pull carries the finish evenly across its bar face and posts. On a bar this width, the surface sits broad enough that the tone reads across a room rather than disappearing into the cabinetry. It coordinates well with warm wood tones, painted fronts in deep neutrals, and other fixtures in the bronze family, within the Devon collection where finish consistency is controlled.
Cabinet shops finishing a transitional kitchen at a wider hole pattern, designers building a hardware program around bronze tones, and contractors replacing existing 160 mm hardware on an existing drawer bank all reach for this spacing. The Devon collection is a practical coordination tool: knobs on doors, this pull on drawers, all in Umbrio, without the mismatch risk that comes from pulling hardware from two different series. Homeowners replacing builder-grade hardware on a large island or a pantry run find that the 160 mm spacing is often already there, waiting.
The center-to-center spacing, 6-5/16 inches (160 mm), is the distance between the centers of the two mounting holes and is what you match to your existing holes or drill pattern. The overall length, 7-11/16 inches (195 mm), is the end-to-end size of the pull and is a clearance and proportion dimension, not a drilling dimension.
Umbrio is Top Knobs' own finish name. It sits in the bronze tone family but is not a generic oil-rubbed bronze, and it is not guaranteed to match a same-named or similarly described finish from another brand or series.
Yes. A bar pull of this length works on a drawer front and on a cabinet door. At 160 mm center-to-center it is a natural fit on a taller door where a shorter pull would look proportionally small.
The Devon collection includes companion knobs and pulls in the same design language and finish, so you can run this pull on drawers and a matching Devon knob on doors.
Choose this pull when the hole pattern is 160 mm and the finish program is bronze: it lands on the right centers, carries the right tone, and stays consistent across every front in the Devon collection.
Sold In: 1 Each