Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Top Knobs Devon series pull is a transitional bar pull for cabinet doors and drawer fronts, mounting on 6-5/16 inch (160 mm) centers in Ash Gray.
The 6-5/16 inch center-to-center is one of the longer standard spacings in the cabinet pull lineup, and that is exactly what recommends it here. On a wide base drawer spanning 24 inches or more, a shorter pull can look undersized and feel that way too. At this spacing the grip runs long enough to engage naturally with the whole hand, and the 7-11/16 inch overall length gives the pull visible presence without overwhelming the front. The same logic applies to tall upper doors and pantry fronts, where a pull drilled at 160 mm anchors the hardware visually at a scale the door can carry. Replacing existing hardware drilled at this spacing is also straightforward: the hole pattern is a standard interval, and the pull drops onto it without modification.
The pull is cast in zinc and finished in Ash Gray, which is a brushed, cooled-down gray that occupies the Silver Tone color family without reading as chrome or nickel. Where a polished silver finish picks up the light and announces itself, Ash Gray holds a flat, even tone across the bar. That quality makes it useful in spaces where the hardware is meant to coordinate with the cabinetry rather than contrast against it. Against white or light wood fronts it reads as a soft accent; against gray or charcoal cabinetry it nearly disappears into the door. The flat 11/16 inch bar section reinforces the restrained quality of the finish: no curves, no bevels, just a clean rectangular profile against the face of the front.
This pull is a practical choice for kitchen renovations, bath vanities, and built-in projects where the hardware program is gray-toned and the cabinetry calls for a longer pull. Designers specifying transitional kitchens will find the Devon series finish and profile language neutral enough to work across a range of door styles without pushing the room toward a particular decorating moment. Cabinet shops fitting out wider drawer configurations can use the standard 160 mm hole pattern to streamline installation. For a homeowner replacing hardware on an existing run of cabinetry drilled at 6-5/16 inch centers, this is a direct swap at a scale that works with the opening sizes already there. The Devon collection's companion pieces in matching knobs and backplates allow a consistent hardware language across the full kitchen without mixing series.
The spacing between the mounting holes. The 160 mm pull mounts on 6-5/16 inch centers and runs 7-11/16 inches end to end; the 128 mm version is shorter. Use the spacing that matches your existing holes or suits the width of the front you are pulling.
The source data does not specify the application method. Ash Gray is the manufacturer's finish name for this SKU; it is a cool gray tone in the Silver Tone color family.
The Devon collection includes companion knobs and backplates in the same series and finish, which is the standard way to coordinate pulls on drawers with knobs on doors within one kitchen.
1-1/8 inches (28 mm) from the mounting surface to the back of the grip.
Choose this pull when the project calls for a longer center-to-center in a cool, restrained gray that coordinates across a transitional kitchen without competing with the cabinetry.
Sold In: 1 Each