Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Top Knobs Devon pull is a 12-inch center-to-center bar pull for wide cabinet drawers, tall pantry doors, and oversized cabinet fronts where a shorter pull would look undersized against the front.
At 12 inches center-to-center, this pull is in a different category than the 3-3/4 or 5-inch pulls doing most of the work on upper doors and narrow drawers. It is the right scale for a 36-inch base cabinet with a wide drawer bank, a 30-inch refrigerator panel, a full-height pantry door, or an island drawer where a shorter pull would look like an afterthought. The 12-5/16-inch overall length means it reads as a clear horizontal element across the front rather than a small accent. Designers who apply a proportion-based approach to hardware selection often reach for this length on fronts that are 30 inches wide or wider, though sizing is a design choice rather than a fixed rule. On a transitional kitchen where the fronts run flat and wide, this pull anchors the hardware program at the largest pieces and lets the shorter pulls on narrower drawers read as a family.
Sable is a dark, warm-toned finish with more depth than a standard matte black. Where matte black reads as a flat neutral, Sable carries a subtle tonal richness that works particularly well against warm wood species, cream or greige painted fronts, and natural-finish cabinetry where a cooler black might feel disconnected from the wood tone. The bar section is 1/2 inch wide, which is a narrow profile for a pull of this length. The result is a pull that has visual presence from a distance because of its span, but reads as a fine line up close rather than a heavy bar. The zinc substrate gives the finish an even, consistent surface across the full length of the bar.
This is hardware for a kitchen, bath, or built-in project where at least some of the cabinetry is wide enough to call for a proper large-format pull. Cabinet shops speccing a complete hardware program will find the Devon collection covers the full range of center-to-center spacings, so the 12-inch pull at the pantry and the 3-3/4-inch pull at the upper doors share a design language. Designers working on a transitional interior where hardware should be quiet but scaled correctly will find the Sable finish and slim bar profile fit that brief without requiring a bold design statement. Homeowners replacing hardware on a wide drawer bank or a refrigerator panel can match the 12-inch center-to-center on existing holes without drilling.
The overall end-to-end length is 12-5/16 inches (313 mm). The center-to-center mounting distance is 12 inches (305 mm), which is what you match to existing holes or your drilling template.
Sable is a deeper, warmer-toned dark finish rather than a flat neutral black. The two are distinct finishes and are not interchangeable in a mixed hardware program.
Yes. The Devon collection is available across multiple center-to-center spacings in the same Sable finish, so you can run the 12-inch pull on wide fronts and shorter Devon pulls on narrower drawers and doors within the same design.
A 12-inch center-to-center pull is a common choice for tall pantry doors and full-height cabinet fronts. Confirm the center-to-center spacing suits your door's drilling pattern before ordering.
Choose this pull for the wide drawers and tall doors in a transitional kitchen or built-in where the hardware needs to be in proportion to the cabinetry, finished in Sable for a warm dark tone that works with wood and painted fronts alike.
Sold In: 1 Each