Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Top Knobs Devon pull is a transitional bar pull for cabinet doors and drawer fronts, mounting on 5-1/16 inch (128 mm) centers and finished in Flat Black.
The 5-1/16 inch (128 mm) center-to-center is a standard two-hole spacing that appears on a wide range of cabinet doors and drawer fronts, from upper cabinet doors in the 12 to 18 inch width range to mid-depth base drawers. At this spacing, the pull sits proportionally on a door without crowding the edge on one side or leaving too much float in the center. For a shop running out a full kitchen or a designer specifying hardware across a mixed run of doors and drawers, this spacing covers a lot of the layout without requiring a secondary pull size. If you are replacing existing hardware, measure between the centers of your two current screw holes to confirm this is your spacing before ordering.
Flat Black is a matte, non-reflective surface, which behaves differently than a satin or polished black. It absorbs light rather than bouncing it back, so it reads as a solid, even tone across the bar rather than picking up hot spots from task lighting or window glare. Against white, cream, or light wood cabinetry it creates a clean graphic contrast. Against darker fronts it recedes into the door and lets the wood or finish take over. The pull is cast in zinc and carries the Flat Black finish applied over that base material. Zinc is the standard construction for this type of hardware and gives the bar its rigidity without adding unnecessary weight to a drawer front.
This is a pull for transitional kitchens, bathrooms, and built-ins where the hardware should be visible but not the dominant detail. The slim 7/16 inch bar section means the pull does not project heavily from the door face in cross-section, which suits flat-panel, shaker, and inset door styles equally well. Cabinet shops building transitional kitchens will find the Devon collection practical to specify across a full run: the same design language carries across the knob and pull sizes in the series, so mixing a knob on upper doors and this pull on drawers produces a coherent program rather than a collection of mismatched pieces. Designers working on renovation projects with existing hole patterns will appreciate that 128 mm is one of the most reliably stocked spacings across the industry.
The bar section is 7/16 inch (11 mm) wide, which is a slim profile. It is not a thick architectural bar; it reads as a line on the door rather than as a heavy rail.
It will if your existing holes are drilled at 5-1/16 inch (128 mm) center-to-center. Measure between the centers of your existing screw holes to confirm. The overall length is 5-5/8 inches, which is larger, so confirm there is clearance around the drill pattern on your door or drawer front.
A matte finish is generally more forgiving of minor surface contact than a polished one because it has no reflective surface to break. This catalog does not carry a wear rating for this finish; if durability in a high-use environment is a primary concern, that is worth confirming with the supplier before specifying at volume.
Yes. The Devon collection includes knobs and pulls in the same series. Check the Devon series filter to find the matching knob for door applications.
This Devon pull in Flat Black gives a transitional kitchen a consistent, low-sheen black hardware line across the doors and drawers where 128 mm centers are the call.
Sold In: 1 Each