Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Top Knobs Devon pull is a transitional bar pull for cabinet doors and drawer fronts, mounting on 6-5/16 inch (160 mm) centers in an Umbrio finish.
The 160 mm center-to-center is a step up from the 128 mm spacing common on narrower drawer fronts, and it fills a different role. At this scale, the pull anchors a wide base drawer, a pot-and-pan cabinet, or a full-height pantry door without looking undersized against the front. Specifiers and cabinet shops running a transitional kitchen program often move to 160 mm centers when the drawer bank widens past 18 inches, where a shorter pull starts to look like it belongs on a different room entirely. The 7 inch overall length confirms that presence on the door face without overpowering a standard 24-inch upper.
Umbrio is a dark bronze-tone finish with a warm undertone and a slightly textured surface that keeps the bar from reading as flat. It sits in the bronze family visually, which means it pairs naturally with oil-rubbed or dark bronze fixtures already in the room without demanding an exact match. The pull is cast in zinc, the dominant base material across Top Knobs bar hardware, with the Umbrio coat applied over it. The 3/4 inch bar width gives the grip enough substance to feel solid in the hand while keeping the profile narrow enough that it reads as a line on the door rather than a block.
This pull suits cabinet makers, designers, and renovation contractors building or refreshing a transitional kitchen or bath where the hardware program calls for a dark bronze tone and a bar format at the wider 160 mm spacing. It is equally at home on a flat-slab front or a shaker-profile door. Because it is part of the Devon collection, knobs and smaller pulls in the same series carry the same design language and finish, which makes it straightforward to run pulls on wide drawers and coordinate knobs on doors from one family rather than mixing across series.
Center-to-center is the distance between the two mounting holes — 6-5/16 inches (160 mm) — and is the drilling dimension. Overall length is 7 inches (178 mm) and tells you how much of the door front the pull spans. Match existing holes to the center-to-center figure, not the overall length.
Umbrio is a Top Knobs finish name for a dark, warm bronze tone. It has a depth to it similar to oil-rubbed bronze but is specific to Top Knobs. Finish names do not transfer between brands, so confirm the visual against a sample if you are matching to another manufacturer's hardware.
Yes. At this size it suits tall cabinet doors and full-height pantry doors as well as wide base drawers. The bar form and transitional design work in both orientations.
The Devon series includes knobs and pulls in multiple center-to-center sizes and the same Umbrio finish, so you can match the hardware across doors and drawers within one collection.
When the drawer bank or door scale calls for 160 mm centers and the finish program is dark bronze, this Devon pull covers both requirements without compromise.
Sold In: 1 Each