Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Top Knobs Devon series pull is a transitional cabinet pull for doors and drawer fronts that call for a mid-range center-to-center spacing of 5-1/16 inches (128 mm).
The 5-1/16 inch center-to-center dimension is the step up from the standard 96 mm spacing, and it is the hole pattern most often found on upper cabinet doors and mid-width base drawers in renovated and spec-built kitchens. If the existing holes in your cabinetry are already drilled at this spacing, this pull drops in without touching a drill. For new installations, 128 mm is a common factory drill pattern on frameless and face-frame boxes alike, which makes this pull a practical default for a broad range of cabinet programs. The 6-3/4 inch overall length gives it enough visual presence on a taller door while staying proportionate on a 15 to 18 inch drawer front.
The pull is cast in zinc and finished in Flat Black, a matte surface with no sheen or polish to it. That matters in a kitchen where light moves around during the day: a polished black picks up highlights and shows every smudge, while a flat surface stays even across different lighting conditions. The finish reads as a clean, graphic element against light-painted fronts and as a quieter presence on charcoal or navy cabinetry. Because the Devon series runs the same Flat Black across its knobs, pulls, and companion pieces, combining door and drawer hardware from within the collection produces a consistent color rather than the slight variation that appears when mixing finishes from different brands or series.
This pull suits cabinet makers, kitchen designers, and remodelers working in a transitional style, where the hardware needs to read as current without being strictly contemporary. The 128 mm spacing is standard on a wide range of semi-custom and custom cabinet lines, so it fits naturally into both new construction and replacement projects. Homeowners replacing existing hardware at this spacing can treat the swap as a direct like-for-like. Designers specifying a full kitchen in the Devon collection can pair these pulls on drawers with the matching Devon knobs on doors and stay within a single coordinated family throughout. The Flat Black finish performs equally well in a white Shaker kitchen and a more layered, furniture-influenced space.
Yes. 5-1/16 inches converts to approximately 128 mm, and both are the same standard spacing. The pull is manufactured to fit holes drilled at that dimension.
Flat Black is a low-sheen, non-reflective finish. It has less surface variation than a satin and no polish to it. The Devon series uses this finish consistently across its pieces, so the pull and any companion knobs will match within the collection.
The source data for this SKU does not confirm whether mounting hardware is included. Check the product packaging or contact the seller before assuming screws are in the box.
At 6-3/4 inches overall with 128 mm centers, this pull is well suited to upper cabinet doors and mid-width drawers. Sizing hardware to roughly a third of the front's width is a common designer guideline, though it is a preference rather than a fixed rule.
When the cabinetry is already drilled at 128 mm, this pull closes the project without a trip to the shop for a different spacing — and in Flat Black it does that without compromising the finish program.
Sold In: 1 Each