Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Top Knobs Ellis pull is a transitional bar pull for cabinet doors and drawer fronts, mounting on 5-1/16 inch (128 mm) centers in an Ash Gray finish.
The 5-1/16 inch (128 mm) center-to-center spacing occupies the mid-range of the standard hole-pattern spectrum, larger than the 96 mm spacing common on narrower drawers and smaller than the 160 mm spacing used on wider ones. That puts this pull in the range for mid-width base drawers, standard upper door heights, and the kind of mixed layout where a single pull size serves several fronts across the run. If the existing cabinetry is drilled to 128 mm centers, this is a two-screw swap with no new holes required.
The pull is cast in zinc and finished in Ash Gray. Ash Gray is a cool, slightly muted tone that sits between a conventional satin nickel and a true architectural gray. On a white or light-painted cabinet it reads as a soft neutral accent rather than a hard chrome contrast. On a darker front it holds enough distinction to register as hardware without competing with the cabinetry color. The matte quality of the finish means it does not pick up overhead light the way a polished surface would, which keeps the bar from becoming a visual focal point when the intent is for the cabinetry itself to lead.
This pull is a practical choice for transitional kitchens and baths where the hardware program needs to bridge a contemporary cabinet profile and a warmer, more traditional finish palette. Ash Gray coordinates with greige and warm-white painted cabinetry without the clinical edge of a bright silver, and with gray or charcoal fronts without disappearing into the door. Designers specifying a mixed-metal kitchen often find a gray-toned pull threads the room better than a strict silver or a gold. For cabinet shops running 128 mm holes as a standard, the Ellis series covers knobs and additional pull lengths in the same design language, making it straightforward to spec the full hardware program from one collection.
It sits between the two. The surface has a cool undertone without the brightness of satin nickel and without the depth of a dark matte gray. The light in the room will shift how it reads.
The overall length is 5-3/8 inches (137 mm), which is the end-to-end measurement of the pull. The 5-1/16 inch (128 mm) center-to-center is the distance between the two mounting holes. Drill to the center-to-center figure, not to the overall length.
The Ellis collection includes companion knobs in the same design language and finish, which is the standard way to run pulls on drawers and knobs on doors within one hardware program.
1-1/8 inches (28 mm) from the door face to the back of the grip.
Choose this pull when 128 mm centers are already in the layout and the hardware program calls for a finish that works across both cool and warm cabinet colors without committing to either.
Sold In: 1 Each