Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Top Knobs Ellis pull is a transitional bar pull for cabinet doors and drawer fronts, mounting on 6-5/16 inch (160 mm) centers.
The 6-5/16 inch center-to-center is a step up from the 128 mm pulls common on narrower drawers and suits cabinetry where a shorter pull would look undersized against the front. Wide base drawers, double-door pantry sections, and tall upper cabinet doors all benefit from hardware scaled to the front rather than hardware that disappears in the middle of it. If you are replacing existing hardware drilled to 160 mm centers, this pull drops straight onto those holes. If you are specifying new cabinetry, this spacing gives the hardware enough visual weight to read from across the room.
The pull is cast in zinc and finished in Flat Black. Flat Black is a matte, non-reflective surface that does not pick up ambient light or show the glare that a polished black would. On white or light-painted fronts it holds a hard contrast that reads as a deliberate graphic choice. On dark or charcoal cabinetry it recedes and lets the cabinet front carry the room. The slim 3/8 inch bar width keeps the profile from reading as heavy even at this length, so it suits both slab-front cabinetry and shaker doors without competing with the door style.
This pull is well suited to a kitchen, bath, or built-in where the hardware program is black and the fronts are wide enough to need a 160 mm pull. Designers specifying a full kitchen will find that the Ellis collection covers this spacing and others, with companion pieces that share the same bar profile and Flat Black finish so knobs on doors and pulls on drawers stay in the same design language. Cabinet shops and contractors doing a hardware swap on existing 160 mm-drilled cabinetry can use this as a direct replacement without re-drilling. It also suits a laundry room, a home office built-in, or a media cabinet where the same transitional sensibility applies.
No. The overall length is 6-3/4 inches end to end. The mounting holes are spaced 6-5/16 inches (160 mm) apart, center to center. Match the 160 mm figure to your existing holes, not the overall length.
Flat Black is a non-reflective, fully matte surface with no sheen. It sits flatter than a satin finish, which carries a slight gloss, and has none of the polish of an Oil-Rubbed Bronze or a glossy black.
Yes. The Ellis series includes companion knobs and pulls in the same design language and finish, so you can mix knobs on doors and pulls on drawers within one collection.
The pull mounts with machine screws through the front. Screw length determines compatibility with thicker fronts; confirm the screw length suits your front's thickness before installing.
At 160 mm centers, this Ellis pull gives wide cabinet fronts the scaled hardware they need without adding visual weight the bar profile does not earn.
Sold In: 1 Each