Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Top Knobs Ellis pull spans 12 inches center-to-center, a scale designed for wide drawer banks, tall pantry doors, and oversized cabinet fronts where a shorter pull would look undersized against the front it sits on.
A pull at this center-to-center spacing is a statement about proportion. On a wide drawer, a short pull sits in the middle and disappears; a 12-inch span reads as an intentional horizontal line that reflects the full width of the front. That makes it the right scale for a 24-inch or 30-inch base drawer, a double-door pantry cabinet, or a furniture-style island with oversized drawer faces. It also suits tall upper doors on wall cabinets that run to the ceiling, where the pull needs visual mass to read at height. The slim 3/8-inch bar keeps the profile clean rather than heavy, so the scale of the hardware comes from its length rather than from a thick or chunky section.
The pull is cast in zinc and finished in Polished Nickel. Polished Nickel is a fully reflective, mirror-bright surface with a slightly warmer undertone than Polished Chrome, which means it coordinates naturally with warm whites, light wood tones, and cream-painted cabinetry without the cooler cast of chrome. On a slim bar at this length, the polished surface catches light along the full run of the grip, which reinforces the horizontal line rather than breaking it. Zinc is the standard substrate in this catalog, and a properly applied plated finish over zinc performs well in an indoor kitchen environment.
Designers specifying transitional kitchens reach for this pull when the cabinetry mixes shaker profiles with modern hardware, or when the finish program already includes polished nickel plumbing fixtures and the hardware needs to match rather than introduce a second metal. Cabinet shops outfitting a furniture-style island or a pantry wall will find the 12-inch spacing appropriate for the scale of those fronts. Homeowners replacing hardware on a wide drawer bank that is already drilled at 305 mm centers can drop this pull onto existing holes without additional drilling. Because it belongs to the Ellis collection, coordinating knobs on door fronts and shorter pulls on smaller drawers in the same kitchen are available in the same series and finish.
No. Both are bright reflective finishes, but Polished Nickel has a slightly warmer, softer tone compared to the cooler, bluer cast of Polished Chrome. They are not guaranteed to match each other, even at the same brightness level.
Yes, provided your existing holes are centered 12 inches (305 mm) apart. Measure between the centers of the two holes, not between the outer edges, to confirm the spacing.
Yes. A 12-inch center-to-center pull is well proportioned for tall pantry doors and full-height cabinet fronts where a shorter pull would look undersized.
The Ellis collection includes companion pieces in the same design language and finish, so knobs and shorter pulls for narrower drawers or doors are available within the same series.
When the drawer or door front calls for hardware that matches its width rather than sits in the middle of it, the 12-inch Ellis pull in Polished Nickel delivers the span and the finish to do that cleanly.
Sold In: 1 Each