Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Top Knobs Ellis pull is a transitional bar pull for cabinet doors and drawer fronts, mounting on 5-1/16 inch (128 mm) centers in a Flat Black finish.
The 5-1/16 inch center-to-center is a workhorse spacing. It sits between the narrow 96 mm pattern common on smaller drawers and the wider 160 mm pattern used on deeper drawer banks, which means it hits the sweet spot for standard base cabinet drawers, upper door stiles, and vanity fronts. If the existing holes in a cabinet are drilled to 128 mm, this pull drops straight onto them with no new drilling required. For new construction, the same spacing gives the installer room to work on fronts in the 15 to 24 inch width range without the pull feeling either cramped or lost.
Flat Black is a matte, zero-sheen surface. Unlike a polished or satin finish, it absorbs light rather than bouncing it, which keeps the hardware from pulling the eye across the room. On white or light-painted fronts it reads as a deliberate graphic line. On darker stained wood it nearly disappears into the cabinetry, letting the grain do the work. The finish is applied over a zinc base, and the 5/16 inch section keeps the profile narrow enough that the pull registers as a line rather than a shape. That combination is why the Ellis series lands in transitional projects as readily as in contemporary ones: the silhouette is restrained enough for either.
This pull suits a kitchen, bath, or built-in project where the hardware needs to coordinate across a range of cabinetry styles without committing hard to one design language. Designers specifying a transitional kitchen will find it reads cleanly against both shaker and slab fronts. Cabinet shops running a standard drawer drilling program at 128 mm can source this pull confident it aligns with that pattern across multiple door and drawer sizes. Homeowners replacing hardware on an existing bank drilled to 128 mm centers get a straightforward swap without touching the fronts. Because it belongs to the Ellis collection, companion knobs are available in the same Flat Black finish for a consistent look across doors and drawers.
The bar is 5/16 inch (8 mm) wide, which is on the slender end for a bar pull and contributes to its fine-lined look on the door face.
Top Knobs uses Flat Black as the name for this finish. It is a low-sheen, non-reflective black, similar in character to what other brands call matte black, but finish names are not standardized across manufacturers.
Yes. The Ellis collection includes knobs in the same Flat Black finish, which is the standard approach for running pulls on drawers and knobs on doors within one design program.
Center-to-center, 5-1/16 inches here, is the distance between the two mounting holes and is the number to match to existing drilling. Overall length, 5-1/2 inches, is the end-to-end size of the pull and determines how much of the front face it covers.
Choose this pull when the project calls for 128 mm centers, a slender profile, and a flat black finish that holds its tone whether the cabinetry around it is light, dark, or somewhere in between.
Sold In: 1 Each