Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Top Knobs Edge Pulls tab pull mounts on 5-1/16 inch (128 mm) centers and brings a flat, contemporary profile to cabinet doors and drawer fronts finished in Polished Chrome.
The 5-1/16 inch center-to-center spacing is a standard kitchen and bath hole pattern, widely used on drawer banks, upper cabinet doors, and base doors that sit below 24 inches wide. At this spacing, the pull lands near enough to the center of most mid-width fronts to feel intentional without looking undersized. If you are replacing hardware on an existing cabinet run drilled to 128 mm, this pull drops straight onto those holes without touching a drill. For new installations, the same spacing gives you the flexibility to source companion pieces across the Edge Pulls series without worrying about a gap between the grip and the edge of the front.
The pull is cast in zinc and finished in Polished Chrome. The chrome surface is fully reflective, which means it picks up the colors and lines around it rather than holding its own shadow the way a matte or brushed finish does. In a kitchen with stainless appliances, chrome plumbing fixtures, or bright LED lighting, that reflectivity reads as a continuation of those surfaces rather than as a separate material. The tab profile keeps the cross-section narrow at 3/4 inch, so there is less surface catching the light than on a wider bar, and the pull reads as a clean horizontal line rather than a band across the front.
This is a straightforward choice for a contemporary kitchen or bath where the hardware program is running polished chrome and the cabinetry is flat-fronted or shaker-style. The 2 inch projection gives enough clearance for a full-hand grip, which makes it comfortable on a base drawer loaded with pots as well as on a lightly used upper door. Designers specifying a full kitchen can pair this pull on drawers with a knob from the Edge Pulls collection on doors, keeping the same contemporary profile and finish language across the entire run. Cabinet shops producing contemporary builds in volume will find the 128 mm spacing easy to template across a full drawer bank.
Yes. 5-1/16 inches converts to 128 mm, and the two values describe the same hole spacing. Either measurement can be used when setting a drilling template.
A polished, high-reflectivity surface does show marks more readily than a brushed or matte finish. It wipes clean with a damp cloth just as readily.
Yes. The Edge Pulls series by Top Knobs includes companion pieces in the same profile and available finishes, so you can coordinate knobs on doors with pulls on drawers under one collection.
The overall length is 6-1/2 inches (165 mm) and the center-to-center is 5-1/16 inches (128 mm). The extra length beyond the hole spacing is the overhang of the tab on each end, not additional drilling.
Choose this pull when the job calls for 128 mm centers, a flat contemporary tab, and a chrome finish that coordinates with the fixtures already in the room.
Sold In: 1 Each