Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Top Knobs Centinel pull is a compact two-hole pull sized on 1-1/4 inch (32 mm) centers, suited to narrow drawer fronts, small cabinet doors, and inset hardware programs where a wider spacing would overrun the front.
Most cabinet pulls are drilled at 3 inches or wider, which suits the scale of a standard drawer front. A 1-1/4 inch center-to-center spacing is a different animal: it appears on narrow tip-out trays in front of the sink, on small spice drawer fronts, on jewelry drawer inserts, and on inset cabinetry where the frame leaves limited face room. It also shows up in furniture retrofits, where an existing piece was drilled to a tighter standard than kitchen-cabinet convention. When the holes are already there and the spacing is 1-1/4 inches, this pull drops in without modification. For new work, the 32 mm spacing is compact enough to center cleanly on a front as narrow as 4 inches without crowding either edge.
The pull is cast in zinc and finished in Polished Nickel. Polished Nickel is a bright, mirror-adjacent finish with slightly warmer undertones than chrome, which gives it more visual depth on a flat front without reading as yellow. It coordinates readily with brushed and polished fixtures in the same Silver Tone family, though no two manufacturers' nickel finishes are identical and cross-brand matching should be verified in person. The polished surface shows fingerprints more readily than a brushed finish does, and wipes clean just as quickly. Zinc is the standard substrate across the Centinel line, providing consistent weight and detail reproduction across the series.
This pull suits a few distinct situations. Homeowners retrofitting an older piece of furniture or a built-in with its original 1-1/4 inch hole pattern will find it a direct fit. Designers specifying inset cabinetry programs often reach for a tighter spacing to keep hardware proportional to the narrower stile and rail margins that inset construction produces. Cabinet shops building jewel drawers, spice inserts, or tip-out fronts into a polished nickel hardware program can use this pull to maintain finish continuity without switching to a knob. The transitional styling makes it a workable choice across painted shaker, light wood slab, and furniture-style cabinetry alike.
It is not the dominant kitchen-cabinet standard, which sits at 3 inches and wider. It is, however, a recognized spacing for small fronts, inset cabinetry, and furniture-scale applications. If you are replacing existing hardware, measure between the centers of your current holes before ordering.
Both are bright finishes in the silver tone family. Polished Nickel tends to carry slightly warmer undertones than chrome, which can read as more traditional or furniture-like on the door. Side by side the difference is visible; in most installed kitchens the two read similarly from across the room.
The Centinel series includes companion knobs and pulls in the same design language and Polished Nickel finish, which is the standard way to run pulls on drawers and knobs on doors within one hardware program.
Projection is the distance from the face of the door or drawer front to the back of the grip. At 3/4 inch, the clearance is enough for a fingertip but snug, which suits a compact pull of this size. Check that the projection clears any adjacent frame or overlay edge before installing.
When the spacing is 1-1/4 inches and the finish is Polished Nickel, this Centinel pull delivers both without compromise, keeping a consistent hardware program across every front in the cabinet run.
Sold In: 1 Each