Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Top Knobs Edge Pulls tab pull mounts on 5-1/16 inch (128 mm) centers and brings a flat, mid-century profile to cabinet doors and drawer fronts in Polished Chrome.
The 5-1/16 inch center-to-center is a staple hole pattern across mid-size cabinet drawers and door fronts, which is why it appears on base cabinets, upper door pairs, and bathroom vanity drawers alike. At this spacing the tab reads as a deliberate horizontal element rather than a small accent, giving a drawer front of moderate width something with real visual presence. For a shop or installer replacing hardware across a run of existing cabinetry, confirming that the existing holes fall on this pattern turns the swap into a no-drill job.
The pull is cast in zinc and finished in Polished Chrome. Chrome is among the most light-reactive finishes in cabinet hardware: the polished surface picks up the room and runs a bright line along the flat face of the tab, which on a horizontal pull means the highlight follows the grain of the cabinetry rather than interrupting it. It coordinates readily with chrome faucets, appliance trim, and light fixtures, making it a natural choice when the room already runs a silver-tone metal palette. A polished surface shows marks more readily than a brushed or matte finish and wipes clean just as quickly.
This tab pull suits the designer specifying a full kitchen run in a single silver-tone finish, the contractor sourcing replacements for an existing 128 mm hole pattern, and the homeowner updating cabinetry where chrome fixtures are already in place. The tab form and contemporary style make it at home on slab and flat-panel doors, on frameless cabinets, and on furniture-style vanities where the hardware should sit flat and read as a horizontal line rather than as a projecting bar. Because it belongs to the Edge Pulls collection, companion pieces in the same series are available for extending the hardware program across mixed door and drawer configurations.
Measure from the center of one screw hole to the center of the other. This pull requires 5-1/16 inches (128 mm) between those centers. Overall length is 6-1/2 inches, which is larger and is not the drilling dimension.
The tab stands 2 inches (51 mm) out from the face of the door or drawer front, which gives the hand comfortable clearance behind the grip without the pull reading as deep or oversized on the front.
A polished surface does show marks more than a brushed or matte finish. It wipes clean easily with a damp cloth.
The Edge Pulls series includes companion pieces in the same design language. Mixing pulls on drawers with knobs on doors from the same collection is a common hardware approach for a unified look.
At 5-1/16 inch centers in Polished Chrome, this tab pull is sized for the most common mid-cabinet mounting pattern and finished to coordinate with the silver-tone fixtures already in most kitchens and baths.
Sold In: 1 Each