Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Top Knobs Fulcrum pull is a contemporary bar pull sized for the widest fronts in the kitchen, running on 11-5/16 inch (287 mm) centers and measuring 13 inches from end to end.
An 11-5/16 inch center-to-center pull is a specific tool. It belongs on wide base drawers — the kind that span two or three cabinet bays — deep drawer stacks where every front carries the same hardware, tall pantry doors, and furniture-scale cabinet islands where a shorter pull would look undersized against the front. At this spacing, the pull spans enough of the front that it registers as a design element rather than just an opening mechanism. That is the reason designers reach for a pull at this scale on a statement piece: not for ergonomics alone, but because the length finishes the proportion of the front.
The pull is cast in zinc and finished in Matte Black. Matte Black absorbs light rather than reflecting it, which keeps the hardware from pulling the eye away from the cabinetry on a wide front where a polished finish would catch every ambient glare. The 1/4 inch width keeps the bar slim even at 13 inches overall, so the pull reads as a tight horizontal line rather than a heavy rail. Against both light and dark cabinet fronts, that combination of flat black and narrow section tends to recede visually, which lets the door material and the profile do the work.
This pull is the right choice for a kitchen or built-in project where at least some of the fronts are wide enough to justify hardware at this scale. It is also a natural fit for a single-wall kitchen with a long run of drawers all drilled to the same spacing, where consistency across the row matters more than matching a pre-existing hole pattern. Designers specifying a contemporary kitchen in matte black will find that the Fulcrum collection lets them carry the same finish and profile logic from the smallest drawer to the largest pantry front, using companion sizes in the same series rather than mixing programs.
Center-to-center, 11-5/16 inches (287 mm), is the distance between the centers of the two mounting holes — the number to match when replacing existing hardware or laying out a new drill pattern. Overall length, 13 inches (330 mm), is the full end-to-end size of the pull. The two are always different on a bar pull.
Yes. At this center-to-center spacing it works on any front wide enough to carry it proportionally, including tall pantry doors and large drawer faces. The hand grips the bar naturally on either orientation.
A matte surface shows smudges less readily than a polished one. Day-to-day marks wipe off easily, and the low-sheen finish does not develop the visible wear pattern that a polish can.
The Fulcrum collection spans multiple center-to-center sizes. Pulls from the same series share the same finish and profile, so mixing sizes across a drawer bank or pairing a smaller pull with this one on adjacent fronts keeps the hardware program consistent.
When the cabinetry calls for a pull that spans the full width of a wide drawer or a tall pantry door, the Fulcrum at 11-5/16 inch centers in Matte Black delivers the proportion and the finish without visual noise.
Sold In: 1 Each