Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Top Knobs Alaire pull is a contemporary bar pull that mounts on 12 inch (305 mm) centers, a spacing sized for wide base drawers, deep pot drawers, and tall pantry fronts where a shorter pull would look lost.
Twelve-inch centers put this pull squarely in the territory of wide cabinetry. A deep pot-and-pan drawer, a full-height pantry door, a spice cabinet that spans two frames, an appliance garage door — these are the fronts where a 3 or 5 inch pull reads as a small accent rather than functional hardware. At this spacing the pull runs nearly the full width of a standard 15-inch base drawer, which gives the eye a horizontal line to follow rather than a centered detail to find. The 15-1/2 inch overall length adds a few inches of visual run beyond the hole pattern on each end, keeping the proportions balanced without extending past the edges of the front.
The pull is cast in zinc and finished in Brushed Nickel. The brushing process produces a fine directional grain on the surface that diffuses light instead of reflecting it as a hard shine, which keeps the hardware from drawing attention to itself under task or pendant lighting. Brushed Nickel sits in the silver-tone range without the starkness of polished chrome or the warmth of satin brass, which is why it coordinates easily with stainless appliances, brushed faucets, and most light fixture finishes already common in kitchens and baths. The slim 1/2 inch bar keeps the geometry quiet — this is a pull that belongs to the door, not in front of it.
This pull is a practical choice for cabinet shops and designers specifying hardware on large kitchen layouts, and for homeowners replacing hardware on a wide drawer bank or pantry run. The 12-inch spacing is standard enough to replace existing hardware on fronts drilled to that pattern without additional work. Specifiers building out a full Alaire program can pair this pull with the companion knobs and shorter Alaire pulls from the same series, keeping a consistent design language across every door and drawer in the room regardless of front width. It also works as a standalone upgrade on a single oversized front when the rest of the hardware stays as-is — the Brushed Nickel finish blends into enough existing kitchens to make that a viable option.
Center-to-center — 12 inches (305 mm) — is the distance between the centers of the two mounting holes. That is the number to match to existing holes or to the drilling template. Overall length — 15-1/2 inches (394 mm) — is the full end-to-end dimension of the pull, which determines how far it extends across the front.
It is a low-sheen finish. The brushed surface diffuses light so there is no strong reflection, unlike a polished nickel or polished chrome.
Yes. A bar pull at this length works on tall pantry fronts and full-height door fronts as well as on wide drawers. The mounting is the same two-hole installation either way.
The Alaire collection includes companion pieces in the same design language and finish, so you can run pulls on drawers and coordinate knobs on doors within the same series.
When the front is wide enough that a standard pull would look undersized, this Alaire bar pull at 12-inch centers provides the horizontal reach and the clean Brushed Nickel line the cabinetry calls for.
Sold In: 1 Each