Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Top Knobs Dot pull is a contemporary cabinet pull for door and drawer fronts that call for hardware at a larger scale, mounting on 6-5/16 inch (160 mm) centers.
The 160 mm center-to-center is a natural fit for drawer fronts in the 18 to 24 inch range and for upper cabinet doors where a shorter pull would look undersized against the panel. At that spacing, the pull spans enough of the front to look intentional rather than incidental. It also represents a common hole spacing on European-style cabinetry, so this pull frequently drops onto existing drilling without modifications. For a kitchen running a mix of drawer widths, pairing a 128 mm pull on narrower boxes and this 160 mm pull on wider ones is a straightforward way to keep the hardware family consistent while scaling to the front.
The pull is cast in zinc and finished in Matte Black. A matte surface scatters light rather than reflecting it, which keeps the hardware from competing with other elements in the room. In a kitchen with stone counters, wood fronts, or other materials that draw the eye, a low-sheen black pull registers as a detail rather than a focal point. It also holds up visually in high-use areas because it does not show the micro-scratches that accumulate on a polished surface over time. The slim 7/16 inch bar width reinforces the understated character: this is a refined profile, not a bulky one.
This pull suits cabinet shops, designers, and homeowners specifying contemporary kitchens, baths, or built-ins where the hardware program is Matte Black and the fronts are slab, shaker, or otherwise flat. At 160 mm it works well on deep drawer stacks, sink base fronts, and full-height pantry doors where the pull needs to feel proportionate to the front without dominating it. Because it is part of the Dot collection, matching knobs, smaller pulls at other center-to-center spacings, and companion pieces in the same series are available, making it straightforward to run a unified hardware program across an entire kitchen.
Yes. 160 mm (6-5/16 inch) is a widely used European cabinet pull spacing and appears on many production cabinets, making this a common drop-in replacement for existing hardware at that spacing.
The center-to-center measurement, 6-5/16 inches, is the distance between the two mounting holes and is the number to match when replacing existing hardware. The overall length, 6-3/4 inches, is the full end-to-end size of the pull including the posts, and is a clearance and proportion figure, not a drilling dimension.
The projection is 1-1/4 inches (32 mm) from the door face to the back of the grip.
The Dot collection includes pulls at multiple center-to-center spacings, all in the same design language and Matte Black finish, so mixing sizes within the series is a straightforward way to scale hardware to different front widths.
When the drawer bank is wide or the door is tall, pulling up to a 160 mm center-to-center keeps the hardware in proportion with the cabinetry without changing the finish or the design language.
Sold In: 1 Each