Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Top Knobs Wide Square pull is a contemporary D-handle cabinet pull for cabinet doors and drawer fronts, mounting on 5-1/16 inch (128 mm) centers in a Brushed Nickel finish.
The 5-1/16 inch center-to-center is a practical mid-size drilling pattern, sitting between the 3-3/4 inch spacing common on narrower drawers and the 6-5/16 inch spacing used on wider ones. It is the right choice for a mid-width base drawer, a standard upper door, or a vanity drawer front where a shorter pull would look slight and a longer one would crowd the edges. If existing holes are already drilled to 128 mm, this pull drops straight onto them without any new boring. For new construction, the spacing pairs cleanly with typical 18 to 24 inch drawer fronts and 12 to 15 inch door stiles.
The pull is cast in zinc and finished in Brushed Nickel. The brushed surface diffuses light rather than reflecting it, which means the pull holds a consistent tone across different kitchen lighting conditions instead of picking up a bright spot the way a polished finish does. Brushed Nickel sits in the silver-tone family, making it a natural companion to stainless appliances and chrome plumbing fixtures without demanding an exact match. The squared 7/8 inch grip section is wide enough to feel substantial in the hand while keeping the profile compact against the door face.
This pull suits designers and cabinet shops building contemporary kitchens, baths, and built-ins where the hardware should read as clean geometry rather than a decorative accent. The D-handle form gives it a closed return at both ends, which makes it look more finished than an open bar pull at the same center-to-center. Homeowners replacing hardware on an existing cabinet bank drilled to 128 mm centers will find it a straightforward swap. The Wide Square series includes companion pieces, so knobs on doors and pulls on drawers can share the same design language and finish without mixing collections.
The hole spacing is just over an inch wider, so the pull sits further apart on the front and reads as a longer fixture even though the overall lengths are close. For a drawer already drilled to 128 mm, only a 5-1/16 inch center-to-center pull will fit without re-drilling.
A D-handle returns to the mounting post at both ends of the grip, closing the shape. A bar pull leaves the grip open at the ends. The closed return gives the Wide Square pull a more finished look from the side.
Brushed Nickel is in the silver-tone family and tends to read well alongside stainless steel, though exact finish matches between brands are never guaranteed. It is a lower-contrast pairing than chrome and generally reads warmer than polished nickel.
The Wide Square series includes companion knobs and pulls in the same design language and finish, so a mixed hardware program on doors and drawers can draw from one collection.
When the drilling is already at 5-1/16 inch centers and the room calls for a clean contemporary finish, this D-handle pull in Brushed Nickel covers both requirements without compromise.
Sold In: 1 Each