Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Top Knobs Bronte pull is a traditional bar pull sized on 7-9/16 inch (192 mm) centers, a span that suits wide base drawers, full-height pantry doors, and large cabinet doors where a shorter pull would look undersized against the front.
The 7-9/16 inch center-to-center is the right spacing for drawer fronts in the 24 to 36 inch range, a full-height pantry door, or a large island drawer where a 3-3/4 or 5-1/16 inch pull would look like an afterthought. At this spacing, the pull anchors the front rather than floating on it. It also means anyone replacing existing hardware drilled to 192 mm centers can swap in this pull without picking up a drill, which makes it a practical choice for a kitchen refresh where the hole pattern is already set.
The pull is cast in zinc and finished in Polished Nickel, a bright silver-tone surface that reflects light along the full length of the bar. Polished Nickel runs warmer than chrome and slightly softer in tone, which is why it pairs easily with traditional cabinetry in painted whites, creams, and warm wood stains. On a 9-1/2 inch bar, the reflective surface reads as a clean horizontal line across the drawer face. Because the finish is polished rather than brushed, it picks up marks readily and wipes clean just as readily.
This pull fits traditional and transitional kitchens, butler's pantries, and furniture-style islands where wide drawers and tall doors need hardware proportioned to match. Designers specifying a full kitchen often run a shorter Bronte pull on narrower drawers and this 192 mm version on the deeper base drawers and pantry fronts, keeping all hardware within the same collection for a consistent look. Cabinet shops doing a full install will find the 192 mm spacing is common enough in frameless and face-frame construction that this pull lands on standard hole patterns without special layout work.
The center-to-center is the hole spacing: 7-9/16 inches between the centers of the two mounting holes. The 9-1/2 inch overall length is the end-to-end size of the bar, which is always larger than the hole spacing. Drill to 7-9/16 inches, not to 9-1/2 inches.
No. Polished Nickel is a warmer, slightly softer silver tone compared to the cooler, harder brightness of chrome. They are visually similar but not a guaranteed match, and the two should not be mixed across a hardware program expecting a consistent look.
Yes. A bar pull at this length works on tall or wide cabinet doors as well as on drawer fronts. The 192 mm center-to-center is most commonly used vertically on a door or horizontally on a wide drawer.
The Bronte series includes matching knobs and pulls in the same design language. Selecting companion pieces from within the series is the reliable way to keep finishes and proportions consistent across the cabinetry.
When the drawer or door front calls for hardware that holds its own across a wide span, this Bronte pull in Polished Nickel delivers the proportion, the finish, and the traditional character to make it work.
Sold In: 1 Each