Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Top Knobs Edge Pulls pull is a contemporary tab pull for wide cabinet drawers, pantry doors, and large cabinet fronts, mounting on 12-5/8 inch (320 mm) centers.
A 12-5/8 inch center-to-center pull belongs on the fronts that smaller hardware looks lost on. Wide pot-and-pan drawers, full-height pantry doors, appliance garage doors, and large island drawer banks are the natural settings for this spacing. At this scale the pull stops reading as an accent and starts reading as part of the door's proportion, which is exactly the point in a contemporary kitchen where hardware is expected to make a statement about scale, not just provide a grip.
Because the two mounting holes sit 320 mm apart, this pull is also a direct swap onto existing pantry or cabinet fronts already drilled to that spacing, which is a common interval on European-style cabinetry and furniture-scale drawers.
Aluminum is lighter than zinc for a pull of this length, which matters when the piece spans more than a foot. The Brushed Nickel finish sits over the aluminum substrate as a satin-surface treatment, softening the silver tone so the pull does not pick up hot spots under kitchen or undercabinet lighting. Brushed Nickel is a warm neutral in the silver family, meaning it coordinates readily with stainless appliances, chrome fixtures, and polished nickel without demanding a perfect match. The slim 1/2 inch width keeps the tab profile from competing with the door panel itself, so the scale comes from the length, not the bulk.
This pull is the right choice for a kitchen, pantry, or utility room where the hardware needs to hold its own on a large front. Designers specifying contemporary kitchens with flat or slab doors will find the tab profile consistent with the clean-line aesthetic those spaces call for. Cabinet shops building furniture-scale islands or custom pantry columns with 320 mm hole patterns can order in volume knowing the spacing is precise. Homeowners replacing hardware on an existing wide drawer bank drilled to 12-5/8 inch centers get a drop-in fit without redrilling. Because this belongs to the Edge Pulls collection, coordinating pieces in the same series are available for the rest of the run.
Flat. The tab profile is 1/2 inch wide and runs as a thin horizontal bar between the two mounting posts, so it sits close to the door surface.
Yes. At this length and center-to-center spacing it is proportioned for tall vertical fronts as well as wide horizontal drawer faces.
Finish names are not standardized across manufacturers. Brushed Nickel from Top Knobs Edge Pulls coordinates reliably with other pieces in this collection, but a cross-brand match cannot be guaranteed without a side-by-side comparison.
Center-to-center is the distance between the two mounting holes, which is the dimension you match to your existing drill pattern. Overall length is the full end-to-end size of the pull, including the grip and the posts on each end. The two are always different numbers, and the center-to-center value is the one to use when drilling or matching existing holes.
Choose this pull when the cabinetry calls for hardware that spans the front rather than punctuates it, finished in a Brushed Nickel that stays quiet under the light.
Sold In: 1 Each