Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Top Knobs Edge Pulls pull mounts on 12-5/8 inch (320 mm) centers, a spacing sized for wide base drawers, full-height pantry doors, and appliance-scale cabinet fronts where a shorter pull would look undersized against the expanse of the front.
A 12-5/8 inch center-to-center pull belongs on wide cabinetry: a three-drawer base stack, a 30-inch or wider drawer front, a pantry tower door, or a tall upper cabinet where a shorter pull would look like an afterthought. At this spacing the pull spans enough of the front to read as intentional architecture rather than added hardware. It also serves a practical function: a longer grip distributes the pulling force across more of the door, which is useful on heavy fronts that see repeated daily use.
The tab form keeps the profile narrow at 1/2 inch wide, so the pull stays linear and flat against the face of the cabinetry rather than projecting a heavy bar section into the room. On a slab or flat-panel door that effect is particularly clean.
The pull is made from aluminum, which gives the Edge Pulls series a weight-to-size ratio that suits its scale. A pull at this length in a denser material carries noticeably more mass in the hand; aluminum keeps it lighter without reducing its rigidity. The Polished Chrome finish is a bright, mirror-quality surface that picks up and holds light along the full length of the grip. Against white, gray, or two-tone cabinetry, polished chrome reads as crisp and current; against natural wood it introduces a metallic contrast that anchors the design. It coordinates well in kitchens already running chrome faucets, appliance handles, or light fixtures, because this pull will read as the same metal rather than an adjacent one.
This pull suits a designer or cabinet shop specifying hardware for a contemporary kitchen, a built-in entertainment wall, or a wide pantry where the hardware program needs to hold its proportion at large scale. It is also the right choice for a remodel where existing holes are already drilled at 12-5/8 inch spacing and the project calls for a chrome finish that stays in a current design language. The aluminum construction and the Edge Pulls series make this a practical answer for both residential installs and specification work where consistent collection hardware matters across a full project.
Center-to-center is the distance between the centers of the two mounting holes, 12-5/8 inches (320 mm) on this pull. Overall length is the end-to-end measurement of the pull itself, which is 13-1/4 inches (337 mm). Match center-to-center to your existing holes or your drilling template.
Aluminum holds its rigidity well across a 13-inch span and resists flex under normal daily use. It is lighter than zinc or steel at this length, which is part of why the Edge Pulls series uses it at this scale.
A polished surface shows contact marks more readily than a brushed or matte finish. It wipes clean just as easily, but on a high-traffic drawer it will need more frequent attention to stay looking sharp.
Yes. The series spans multiple center-to-center sizes, so the same tab profile and finish can carry through a full hardware program from narrow drawers to wide pantry fronts.
When the cabinetry is wide enough to call for a 12-5/8 inch pull, this Top Knobs Edge Pulls tab pull in Polished Chrome delivers the scale, the clean profile, and the finish coordination to match it.
Sold In: 1 Each