Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Top Knobs Centinel pull is a transitional rectangular cabinet pull that mounts on 3 inch (76 mm) centers, one of the most common cabinet hole patterns in residential cabinetry. It suits cabinet doors and drawer fronts where the hardware should be present without dominating the front.
The 3 inch center-to-center is a standard hole pattern found on cabinet doors, narrow drawer fronts, and smaller base drawers across a wide range of production and semi-custom cabinetry. It is the most frequently drilled spacing in residential kitchens, baths, and built-ins, which means this pull is a straightforward swap on existing cabinetry without any redrilling. At 3-7/16 inches overall, the pull extends just slightly beyond the mounting holes, keeping the footprint tight against the front rather than reaching across it. That proportion reads well on upper doors and on narrower drawers where a longer pull would feel oversized.
The pull is cast in zinc and finished in Matte Black. The matte surface absorbs light rather than reflecting it, so the pull holds a consistent flat tone under kitchen and bath lighting instead of flaring where a polished finish would. On a light-colored or painted front, Matte Black creates a clear visual contrast. On a dark front, the same finish blends into the cabinetry and lets the door profile do the work. The rectangular cross-section adds a sharper edge than a round bar, which reinforces the defined geometry that makes this pull fit comfortably in a transitional setting alongside both shaker and slab door fronts.
This pull is a practical choice for kitchen and bath renovations, new builds, and cabinet shop projects where a standard 3 inch pattern is already drilled or specified. Designers working on a transitional kitchen can run this pull on upper doors and pair it with a longer Centinel pull from the same series on wider drawers, keeping the finish and design language consistent across the layout. Contractors replacing hardware on existing cabinetry benefit from the fact that 3 inch center-to-center is already the most common hole pattern in the field, which eliminates the remeasuring and redrilling that less common spacings require. The Centinel collection includes companion knobs and pulls in the same series, so the hardware program can be built out without mixing design families.
Yes. Three inches converts to 76 mm, and both values refer to the same center-to-center spacing. Either measurement works when ordering replacement hardware.
Projection is the distance from the face of the door or drawer front to the back of the grip, measured at 1 inch (25 mm) on this pull. That is enough clearance for a comfortable finger grip behind the bar.
Yes. The Centinel collection is available in multiple center-to-center lengths, so you can select a longer pull for wider drawers while keeping the same finish and profile across the cabinetry.
Yes. A surface-mounted pull at this spacing works on cabinet doors and drawer fronts. The choice between doors and drawers is a design decision rather than a product limitation.
When the hole pattern is already drilled at 3 inches, this pull drops in, holds the Matte Black finish consistent, and keeps the Centinel collection running cleanly across every front in the room.
Sold In: 1 Each