Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Edgebanding 31152EBM is a PVC edge banding from Doellken Woodtape that is designed to finish exposed panel edges so they look clean and protected in everyday use. The 1mm thick construction creates a solid edge profile that helps mask minor panel irregularities and gives a more substantial feel along the edge. With a 15/16 inch width, this edge banding is sized to cover standard panel thicknesses while leaving enough material for trimming flush after application. The First Class designation identifies this specific line of Doellken Woodtape edgebanding, so installers can match it consistently across multiple projects. The 300 foot roll length supports longer runs on jobs where many edges need to be banded, reducing changeovers and helping maintain a steady workflow at the edgebander or during manual application.
This PVC edge banding is specified at 1mm thick, giving installers a stable material thickness to work with during application and trimming so the edge stays predictable under the tool. The 15/16 inch width is suited to cover typical substrate edges while allowing slight overhang, which is then trimmed back for a clean, flush line along the panel. Supplied as a 300 foot roll, the format supports feeding through standard edge banding setups or cutting lengths for manual application, so small shops and larger operations can integrate it into existing workflows.
This edge banding from Doellken Woodtape is part of the Edge Banding product class, so it is intended for finishing exposed edges on panels where a PVC solution is required. The 1mm thickness positions it well for cabinetry, casework, and similar woodworking where a more pronounced edge than thin tape is preferred. At 15/16 inch width, the banding is suited to edges on panels that fall near three-quarter-inch thickness, giving coverage across the substrate with trimmable overhang. The First Class designation and specific part number 31152EBM-1540-300 let shops tie this roll directly to project documents or inventory lists, which supports clear job planning and repeat use on matching installations.
The 1mm thick PVC profile gives a consistent material cross-section that behaves predictably under trimmers and routers, which helps reduce chipping along the edge line during finishing passes. Because the width is set at 15/16 inch, installers can align the banding with a slight offset and then trim back to a uniform reveal, supporting straight, repeatable edges on multiple panels in a run. The 300 foot roll length means large quantities of edges can be processed from the same roll, so color and texture from this Doellken Woodtape product stay consistent across a bank of cabinets or casework sections. With the clear identifier 31152EBM on the roll and the extended length, shops can log usage against that number, streamline reorders, and maintain the same edge banding specification on future replacement or expansion work.
Edgebanding 31152EBM is a PVC edge banding from Doellken Woodtape, so it is used to finish and protect exposed panel edges in cabinet and woodworking projects.
The 1mm thickness provides a solid PVC edge that handles trimming and routing well, helping installers achieve a clean, consistent profile along the panel edge.
The 15/16 inch width covers typical panel edges with some overhang, giving room for flush trimming so the finished edge aligns closely with the panel face.
The First Class description identifies a specific line of Doellken Woodtape PVC edgebanding, helping shops match this product consistently across related jobs.
The 300 foot roll length allows many edges to be processed from one roll, reducing roll changes and supporting continuous operation on larger runs.
Part number 31152EBM-1540-300 uniquely identifies this 1mm thick, 15/16 inch width First Class PVC edgebanding, simplifying reordering and job documentation.
This Doellken Woodtape PVC edge banding combines a 1mm thickness, 15/16 inch width, and 300 foot roll length so installers can handle extended edge runs with consistent material. By specifying Edgebanding 31152EBM and its part number 31152EBM-1540-300 on project documents, shops align purchasing and fabrication around the same edge profile from Wurth Baer Supply, helping keep cabinet and casework edges uniform from one project phase to the next.
Sold In: 300 Lineal Ft