PRO LUXE Bistro Series matte black pull gives cabinets a straight 160 mm center to center grip, so installers can line up multiple handles on doors and drawers with consistent spacing. The pull length of 7-1/2 inches leaves visible overhang past the mounting holes, which helps cover previous drill marks when updating older fronts. A projection of 1-1/16 inch creates finger clearance from the door face, which supports comfortable opening without knuckles dragging the surface. The 7/8 inch width presents a defined edge for a solid grasp, which helps on heavier doors or pantry units. The zinc material establishes a sturdy metal body, which suits typical cabinet and furniture use. The matte black finish keeps reflections down and blends into darker fronts, which works well when matching other black decorative hardware in the same room.
This PRO LUXE SERIES pull uses 160 mm center to center mounting, so installers drill two holes on that metric spacing for proper fit. The pull body length of 7-1/2 inches means the handle extends beyond the mounting points, which can help span small chips around the holes. The projection of 1-1/16 inch sets the stand-off from the door or drawer face, which influences how far hardware sits proud of the cabinet line. At 7/8 inch wide, the bar provides a defined footprint on the surface, which affects both appearance and how it seats against edge profiles. The screw size is 8-32 x 1 inch, which matches a common cabinet screw thread used in many shop and jobsite installs.
The PRO LUXE Bistro Series 6-5/16 inch pull falls in a size range suited to many base cabinets, wall cabinets, and wider drawers, so one model can cover much of a kitchen layout. The 160 mm center to center spacing aligns with metric drilling patterns, which fits well with frameless cabinetry and jigs built around metric grids. With a 7-1/2 inch overall length, this pull visually anchors taller doors and multi-drawer stacks, which helps create a consistent line across fronts. The matte black finish supports use on darker painted or stained cabinets where a low-reflection look is preferred. Zinc construction keeps the pull in a standard decorative hardware material category, which aligns with other handles and pulls commonly specified for residential wood cabinetry.
The defined 160 mm center to center measurement on this pull lets installers rely on fixed boring patterns, which reduces layout time and helps avoid misaligned handles from cabinet to cabinet. A projection of 1-1/16 inch gives a known stand-off dimension from the face, which helps designers coordinate clearances where doors open near walls, appliances, or adjacent panels. The 7/8 inch width creates a predictable bearing surface against the door or drawer, which can help the handle sit cleanly on flat or lightly profiled fronts. The 7-1/2 inch total length offers an easy reference for aligning hardware across varying cabinet sizes, since the same visual span can be repeated across a room. The specified 8-32 x 1 inch screw size ties the pull to a standard fastener thread, which supports straightforward installation with common cabinet drill and tap practices.
The PRO LUXE Bistro Series matte black pull has a 160 mm center to center dimension, which sets the distance between mounting holes for drilling and layout.
The pull measures 7-1/2 inches in overall length, which provides extra bar length beyond the mounting holes for grip and visual balance on the cabinet front.
The P2156-MB 160mm cabinet pull projects 1-1/16 inch from the surface, giving finger clearance between the handle and the cabinet face.
The pull has a width of 7/8 inch, creating a defined gripping surface and visible bar thickness on the cabinet front.
This cabinet pull is made from zinc with a matte black finish, pairing a metal body with a low-sheen dark appearance.
The PRO LUXE SERIES pull uses 8-32 x 1 inch screws, matching a common cabinet hardware thread and length for mounting through typical door and drawer fronts.
The PRO LUXE Bistro Series matte black pull combines a 160 mm center to center layout with a 7-1/2 inch overall length, so it fits many metric-based cabinet plans. The 1-1/16 inch projection and 7/8 inch width give predictable clearances and grip feel. With zinc construction and a matte black finish, this P2156-MB 160mm cabinet pull aligns with common decorative hardware choices for kitchens, baths, and built-ins. For projects calling for consistent hole spacing, a modern black look, and standard 8-32 x 1 inch mounting screws, this PRO LUXE SERIES pull offers a defined, repeatable hardware option.
Sold In: 1 Each