PRO LUXE Bistro Series pull describes a decorative handle from the PRO LUXE SERIES that is part of the Bistro collection, so it gives cabinets and drawers a coordinated look across a project. The pull is identified as P2156-VB and SZ10VB, which ties directly to the Vintage Bronze version installers expect when matching to existing hardware on a job. The center to center dimension is 160 mm, so it bridges larger door or drawer fronts while maintaining a comfortable hand grip. The overall length is 7-1/2 inches, which gives enough leverage for heavier cabinet doors in kitchens or work areas. The pull is made from zinc, so it offers a solid feel in daily use while supporting the decorative Bistro profile. The Vintage Bronze finish defines the color and surface appearance, which matters when aligning with bronze hinges or other bronze-finished components.
This pull uses a 160 mm center to center spacing, so mounting involves aligning two bore points at that metric distance before fastening. The pull works with 8-32 x 1 inch screws, so it matches a common cabinet thread size that fits many standard door and drawer materials. The 1-1/16 inch projection positions the grip off the face of the cabinet, so there is space to grasp even when door profiles or moldings sit near the handle line. The 7-1/2 inch overall length helps span wider stile or rail sections, so installers can center the pull visually while still landing mounting holes in solid material. The 7/8 inch width keeps the Bistro style narrow enough for frame faces, so it sits comfortably on typical cabinet rail heights.
The Vintage Bronze finish defines this PRO LUXE Bistro Series pull as a match for bronze-toned cabinet schemes, so it suits kitchens, baths, or built-ins that already use bronze hinges or trim hardware. The handle is categorized under Decorative Hardware & Moldings and specifically as Handles and Pulls, Belwith, so it fits projects where a decorative yet functional pull is part of the design package. The 160 mm center to center layout targets applications using wider European-style or full-overlay doors, so installers can line up multiple pulls along long cabinet runs with consistent spacing. The 7-1/2 inch length works on both doors and drawers, so shops can standardize on one handle size across upper and lower cabinets to streamline ordering and layout. With a 1-1/16 inch projection, the pull is well suited to door fronts that need finger clearance away from adjacent panels, so it helps avoid hand contact with neighboring surfaces during use.
The clearly defined 160 mm center to center dimension allows jigs or templates to be set once, so installers can repeat hole placement quickly across multiple doors, reducing layout time on large jobs. The 8-32 x 1 inch screw size matches a common hardware standard, so shops can tap or drill for that thread size knowing it aligns with the pull. The 7-1/2 inch overall length and 7/8 inch width give predictable coverage on stiles and rails, so designers can sketch hardware positions confidently and know how much of the wood face will remain visible. Zinc construction provides a consistent base material, so finishing lines using the Vintage Bronze color can match across pulls in a project. Being sold in both broken and full box quantities, with discounts available for full box or full case quantity orders, supports shop workflows where a single kitchen may need just a few extra pulls beyond standard counts.
The pull uses a 160 mm center to center layout, so it suits cabinets or drawers designed around that hole spacing, especially wider doors and drawer fronts.
The 7-1/2 inch length gives a substantial grip width, so it visually anchors doors and drawers while leaving room at the edges for door profiles or frame details.
The 1-1/16 inch projection stands the pull off the door face, so fingers slide behind it easily, which helps when opening heavier doors or thicker drawer fronts.
The Vintage Bronze finish sets the color and tone, so it coordinates with bronze cabinet hinges, other bronze pulls, or bronze-trimmed interiors on the same project.
The pull uses zinc material, so it provides a solid, consistent base under the Vintage Bronze finish for regular cabinet opening and closing cycles.
The pull is sold in both broken and full box quantities, with discounts available for full box or full case quantity orders, so shops can align purchases with project size.
The combination of a 160 mm center to center dimension, 7-1/2 inch overall length, and 1-1/16 inch projection defines how this PRO LUXE Bistro Series pull will sit and feel on cabinets. The Vintage Bronze finish and zinc material set its appearance and base construction, so it aligns with bronze-focused designs. With the option to purchase in both broken and full box quantities and discounts for full box or full case quantity orders, this SZ10VB pull fits both single-room upgrades and larger cabinet runs. Choose this P2156-VB handle when that specific Bistro style, color, and metric mounting layout match the cabinet plan.