Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
PRO LUXE Bistro Series 3 inch pull is a zinc handle from the Bistro collection with a stainless steel finish, so it delivers the look of stainless while using a zinc base that suits typical cabinet and furniture applications. The 3 inch center to center drilling fixes the mounting points at a common spacing, which simplifies layout on doors and drawers already bored for that pattern. The overall 3-7/8 inch length gives a bit of hand room beyond the screw centers, helping fingers catch the pull cleanly on repeated use. A projection of 1-1/16 inch spaces the grip off the front of the cabinet, creating clearance for fingers without sticking excessively far into the room. The 11/16 inch width provides a balanced profile across the face of doors or drawers, giving a defined grip line while staying streamlined for tight runs of cabinetry.
The 3 inch center to center measurement sets the drilling distance for the mounting holes, so boring at 3 inches on center allows this pull to sit correctly with both screws threading straight into the body. With a 3-7/8 inch overall length, the ends extend slightly past the holes, which helps cover minor drill variances along the rail or stile while still presenting a centered grip. The 1-1/16 inch projection determines how far the pull stands off the face, so the front of the handle sits forward enough for fingertips to hook behind without scraping along the door or drawer surface. At 11/16 inch wide, the bar fits comfortably across typical rail heights, giving installers a predictable footprint when aligning multiple pulls at the same setback from edges or when matching existing rows.
This PRO LUXE SERIES pull belongs to the Bistro collection, so it is suited to cabinet and furniture projects that call for coordinated decorative hardware from a defined design family. The stainless steel finish supports use on installations where other visible metal parts share a similar tone, such as kitchens or casework with stainless-faced appliances or trim. As a handle and pull in the Belwith product class, it fits jobs that require standardized decorative hardware rather than custom-made components. The 3 inch center to center sizing positions it for doors and drawers bored on that spacing, which appears frequently in both new cabinet manufacturing and existing layouts using that standard measurement. With its zinc construction, the pull serves applications where a metal handle is expected to withstand repeated gripping on frequently used fronts.
The 3 inch center to center pattern on this pull supports consistent hole spacing across banks of doors and drawers, helping installers maintain straight visual lines when repeating the dimension through a kitchen or office run. Because the overall length is 3-7/8 inch, the ends of the pull extend beyond the mounting points, which can visually balance on various stile widths and help conceal slight drilling offsets within the footprint of the handle. The 1-1/16 inch projection defines the stand-off, so once that depth is planned at the design stage, fronts can be laid out with confidence that fingers will clear the face without contacting adjacent cabinetry. The 11/16 inch width gives a repeatable contact surface, allowing users to grab the pull reliably from different angles. Identifying the part as SZ13SS ties this specific size and finish to reorders, supporting long-term consistency when adding cabinets or replacing damaged pulls later in the life of the installation.
The 3 inch center to center dimension sets the distance between mounting holes, so drilling at 3 inches on center positions the pull so both screws align straight into the threaded posts.
The 3-7/8 inch overall length lets the pull extend past the screw holes, helping it cover slight drill variations and sit proportionally on standard cabinet rails and drawer fronts.
The 1-1/16 inch projection spaces the pull off the cabinet face so fingers can hook behind the bar comfortably while keeping the handle from protruding excessively into walkways.
The 11/16 inch width gives a defined bar surface that is easy to grasp, while remaining slim enough to line up neatly along narrow rails or closely spaced cabinet fronts.
Part number SZ13SS identifies this exact Bistro pull with its 3 inch center to center, stainless steel finish, and dimensions, supporting consistent selection and future matching.
The zinc material forms a metal body that handles regular opening and closing of cabinets and drawers in typical residential or light commercial decorative hardware applications.
This PRO LUXE Bistro Series 3 inch center to center pull combines a zinc body, stainless steel finish, and 3-7/8 inch overall length to suit doors and drawers drilled on the 3 inch pattern. The 1-1/16 inch projection and 11/16 inch width establish predictable clearances and grip feel across multiple fronts, which supports uniform operation through a run of cabinets. For projects aligning with the Bistro collection and Belwith decorative hardware class, this SZ13SS pull provides a defined size and finish that can be specified wherever a consistent stainless-tone handle is required.
Sold In: 1 Each