PRO LUXE Bistro Series pull describes a cabinet and drawer handle built for projects that call for a specific 96 mm center to center hole spacing, so it drops into existing bores on many standard layouts without layout changes. The pull is part of the Bistro collection, which keeps styling consistent across multiple fronts when the same line is used throughout a job. Its zinc material provides a solid metal body that supports everyday opening and closing of doors and drawers in typical woodworking environments. The black nickel finish adds a dark, reflective look that pairs with contemporary and transitional fronts while keeping the metal surface covered. The 5 inch length works proportionally on many cabinet doors and medium-width drawers where a 3-3/4 inch (96 mm) mounting spread is already drilled.
The 96 mm center to center mounting on this pull means the two through-holes on the cabinet or drawer front align precisely with that spacing, so installers can match common metric drilling patterns. The pull uses 8-32 x 1 inch screws, which thread into the zinc body from the rear of the door or drawer front to clamp the handle firmly against the face. With a 1-1/16 inch projection, the installed pull stands off enough to grab from above or below without fingers scraping the surface as the door or drawer moves. The 7/8 inch width across the face creates a grip area with enough bearing surface for a solid pull on typical cabinet fronts.
This 3-3/4 inch (96 mm) center to center cabinet pull works on fronts drilled to that metric spacing, so it suits many residential and light commercial cabinetry layouts. The Bistro collection identity in the description anchors it within a coordinated decorative hardware line, supporting consistent hardware selection across kitchens, baths, and built-ins that share the same style family. Its 5 inch overall length sits well on medium cabinet doors and drawer fronts, offering a visible handle without overwhelming narrow face frames or slab fronts. The black nickel finish visually matches projects that already use black nickel decorative hardware and moldings, tying this pull into a unified look on doors, drawers, and trim. Because it is categorized as a handle or pull within decorative hardware, it fits into hardware schedules that specify matching handles from the same class.
The 96 mm center to center measurement, stated clearly in the data, gives installers a fixed drilling dimension that can be repeated across banked drawers and aligned door runs for consistent sightlines. Using zinc as the material provides a uniform base metal that accepts the black nickel finish evenly along the body, so multiple pulls from the same collection keep a consistent appearance on the job. The 1-1/16 inch projection and 7/8 inch width, taken together, define the three-dimensional envelope of the handle, helping layout decisions when doors open near walls, tall panels, or adjacent hardware. The stated 8-32 x 1 inch screw size in the description establishes the thread and length that engage the pull, which aligns with common cabinet front thicknesses where this screw length provides through-bore reach. Being listed under Decorative Hardware & Moldings and specifically under handles and pulls, Belwith class, situates this product within professional hardware assortments used for cabinetry work.
The PRO LUXE Bistro Series pull has a 96 mm center to center measurement, which sets the hole spacing for mounting on cabinet doors and drawers.
The pull has a stated length of 5 inches, giving a handle that extends beyond the 96 mm mounting points for a comfortable gripping area.
The Bistro collection pull is made from zinc, providing a metal body that supports the black nickel finish used on the hardware surface.
This black nickel cabinet pull projects 1-1/16 inches from the mounting surface, giving finger clearance when opening drawers or doors.
The cabinet pull uses 8-32 x 1 inch screws, which pass through the cabinet front and thread into the pull body for secure fastening.
The grip area on this pull is 7/8 inch wide, shaping the front profile that the hand contacts when operating the cabinet.
The P2141-BLN cabinet pull from the PRO LUXE Bistro Series combines a 96 mm center to center layout, 5 inch length, and black nickel finish for projects matching those dimensions and appearance. Its zinc construction, 1-1/16 inch projection, and 7/8 inch width give clear physical parameters when planning cabinet and drawer fronts. For cabinetry using black nickel decorative hardware within this collection, this handle offers a defined option that aligns with the stated size and finish.
Sold In: 1 Each