PRO LUXE Bistro Series pull is a satin nickel handle from the PRO LUXE SERIES, giving cabinets or furniture a coordinated look with a defined modern profile. The pull is part of the Bistro Collection, so matching pieces follow the same design language across a job. Its 96 mm center to center drilling sets consistent spacing for cabinet doors or drawers, which helps layout run straight on banks of fronts. The zinc material creates a solid-feeling pull that supports everyday cabinet use in kitchens, baths, or casework. Satin nickel finish keeps reflections soft, which helps hardware read cleanly under project lighting. The pull belongs to the Handles and Pulls, Belwith product class, which aligns it with commonly specified decorative hardware lines. Each detail supports repeatable results when standardizing hardware across multiple openings.
The Bistro Series 96 mm center to center spacing defines where to locate mounting holes, so installers can use templates or jigs set to that distance for repetitive drilling. With a total pull length of 5 inches, the handle centers visually on many common drawer fronts without overpowering the panel. The 1-1/16 inch projection and 7/8 inch width work together to position the gripping area off the face, supporting clearance between hardware and finished surfaces. The satin nickel finish coordinates with other satin nickel cabinet hardware, which helps maintain a unified look across knobs, pulls, and hinges that share similar tones. The handle sits within the Decorative Hardware & Moldings category, supporting its role as a visible finishing component on cabinets.
This satin nickel cabinet pull from the Bistro Collection fits projects that call for 96 mm center to center hardware, matching existing drilling or planned layouts. At 5 inches overall length, it suits many base and wall cabinet drawers, bridging rail widths while keeping edges clear. The 1-1/16 inch projection supports use on doors near adjacent surfaces, because the pull stands off enough to grasp from different angles. Its 7/8 inch width keeps the handle proportionate on face frames or full-overlay fronts, so the hardware reads as part of the design instead of dominating it. As a zinc handle in satin nickel, it ties in with other satin nickel components around appliances, faucets, or lighting that share similar metallic tones.
The defined 96 mm center to center dimension allows installers to set up boring tools once, reducing layout variation across large cabinet runs. Because the Bistro satin nickel handle measures 5 inches long, it registers predictably when measuring from door or drawer edges during hardware placement. The 1-1/16 inch projection sets the gripping point forward, which helps hands clear applied edge profiles or decorative moldings on the front. With a 7/8 inch width, the pull lands with enough surface to grip while still leaving visual breathing room on narrow rails. The SAP description, P2141-SN, PULL, 96MM C/C, STN NKL FIN, identifies the part as a satin nickel 96 mm pull, which aids in matching it across orders or tying it to project specifications. The manufacturer part number SZ14SN offers another reference point when aligning this Belwith-class pull with cabinet hardware schedules.
The PRO LUXE Bistro Series pull has a 96 mm center to center dimension, which sets the drilling distance between mounting holes for consistent cabinet hardware layouts.
The Bistro satin nickel pull is 5 inches long, which helps it span typical cabinet drawer or door widths without overwhelming the front.
This cabinet pull is made from zinc with a satin nickel finish, giving it a solid feel and a soft metallic sheen that coordinates with satin nickel hardware.
The Bistro pull projects 1-1/16 inches from the mounting surface, providing finger clearance behind the handle during cabinet door or drawer operation.
The satin nickel cabinet pull has a width of 7/8 inch, giving a comfortable gripping surface while staying visually balanced on standard cabinet rails.
This pull is part of the PRO LUXE SERIES Bistro Collection and falls under Handles and Pulls, Belwith, aligning it with decorative cabinet hardware families.
The PRO LUXE Bistro Series pull combines a 96 mm center to center layout, 5 inch overall length, and 1-1/16 inch projection to support clean cabinet hardware runs. The zinc construction with satin nickel finish ties into satin nickel schemes while keeping proportions workable on doors and drawers. With clearly defined dimensions and the SZ14SN and P2141-SN identifiers, this satin nickel cabinet pull is straightforward to specify wherever a 96 mm center to center satin nickel handle is required.
Sold In: 1 Each