PRO LUXE Bistro Series pull is a cabinet handle from the PRO LUXE SERIES Belwith line, so it serves as decorative hardware while matching other pieces from the same collection on a project. The pull has a 96 mm center to center dimension, which sets the drilling layout for new doors or drawer fronts and keeps hole spacing consistent across a run. The overall length is 5 inches, so the pull gives enough grip area on standard cabinet fronts without overcrowding narrow rails. A width of 7/8 inch provides a substantial feel in the hand while staying proportionate on typical residential or light commercial cabinetry. The projection is 1-1/16 inch, which sets how far the pull stands off the face and helps fingers clear the door surface comfortably during everyday use.
The 96 mm center to center drilling dimension defines the mounting hole spacing, so it works with standard metric drilling patterns and jigs already set up for 96 mm runs. With the pull length at 5 inches, there is margin beyond the hole locations for comfortable grip while keeping end clearances manageable on narrow rails or stile edges. The 7/8 inch width provides a consistent bearing surface against the cabinet face, which helps the pull sit flat when tightened and gives a clean edge line along the front. Its 1-1/16 inch projection holds the hand away from the face plane, which can reduce marks on finished surfaces during frequent use in busy kitchens or work areas.
This pull belongs to the PRO LUXE Bistro Series collection, so it suits jobs where a unified decorative hardware look is desired across doors and drawers. The 96 mm center to center dimension aligns with a common metric standard, which supports use on new cabinetry drilled for 96 mm spacing and on refacing projects using the same pattern. With a 5 inch overall length, the pull scales well on mid-size drawer fronts and full-height doors, giving fabricators one size that can cover several cabinet zones without changing drill setups. Its 7/8 inch width keeps the pull visually balanced on face frames and frameless fronts, which is useful when running the same hardware line through kitchens, baths, and utility spaces.
The 96 mm center to center measurement makes hole locations predictable, so installers can rely on standard drilling jigs and spacing tools to speed repetitive layout on multi-unit jobs. The 1-1/16 inch projection controls how far the pull stands off, giving consistent hand clearance from piece to piece and helping rows look uniform when viewed from the side. Zinc construction allows the Bistro profile to be cast with repeatable shape, so each pull seats similarly against the surface and contributes to straight sightlines down a bank of cabinets. The stainless steel finish offers a consistent, modern metallic look, helping rows of pulls read as one continuous design line along doors and drawers, which matters in open-plan spaces where hardware alignment is highly visible.
The PRO LUXE Bistro Series pull has a 96 mm center to center dimension, setting the exact drilling distance between mounting holes for consistent cabinet hardware layout.
The pull length is 5 inches, providing a comfortable gripping area on typical cabinet doors and drawers while keeping proportions suitable for a range of front sizes.
This SZ14SS pull is made from zinc material, giving it a solid feel and allowing the Bistro profile to be formed consistently across multiple pieces in a project.
The projection is 1-1/16 inch, so the pull stands off from the cabinet face enough to give finger clearance and a uniform side profile across installations.
The pull width is 7/8 inch, creating a substantial contact area on the cabinet face that supports a stable mounting position and a balanced visual profile.
This Belwith PRO LUXE cabinet pull has a stainless steel finish, giving a neutral metallic appearance that coordinates with many contemporary cabinet and appliance styles.
The PRO LUXE Bistro Series pull with 96 mm center to center drilling, 5 inch length, and 1-1/16 inch projection offers a defined set of dimensions that streamline cabinet hardware layout. The zinc construction with stainless steel finish supplies a consistent Bistro profile and appearance across multiple openings. For cabinetry planned around a 96 mm metric pattern, this SZ14SS pull gives an option that aligns drilling, grip space, and visual scale in one part number.
Sold In: 1 Each