PRO LUXE Chalet Series pull defines this handle as part of the PRO LUXE SERIES decorative hardware line, which helps match it with other pieces from the same series for a consistent look on cabinet runs. The 5-1/16 inch (128 mm) center to center measurement specifies the distance between mounting holes, so it works where existing drilled holes match that pattern on doors or drawers. The satin nickel finish gives the pull a neutral metallic appearance, letting it coordinate with a wide range of cabinet colors in kitchens, baths, or shop-built furniture. Being categorized as Handles and Pulls under Decorative Hardware and Moldings places it in the standard role of a grasp point on casework, so it functions as the primary touch surface for opening and closing. The manufacturer part number SZ34SN uniquely identifies this exact size and finish, which helps reorder or specify it clearly on project lists.
The 128 mm center to center specification sets the exact spacing between the pull's mounting points, so it lines up with pre-bored 128 mm layouts on cabinet doors and drawer fronts. The 5-1/16 inch reference expresses the same spacing in imperial units, which helps match the pull to shop drawings or templates that use inches instead of metric. Being defined as a pull in the Handles and Pulls category clarifies that it fastens to the front of casework, so hole drilling or layout focuses on visible faces rather than edges. The satin nickel finish is part of the identification in the SAP description, which keeps the selected part consistent when multiple trades or purchasing systems reference the same item.
The PRO LUXE Chalet Series 5-1/16 inch (128 mm) center to center satin nickel pull is positioned for use on cabinets and casework where the drilled hole spacing is 128 mm, allowing straightforward alignment with existing or planned layouts. Its satin nickel finish places it in projects aiming for a neutral metal tone, so it works across painted, laminate, or wood-grain fronts without competing with other finishes. Being a decorative handle in the Wurth Baer Supply assortment means it serves roles on residential or commercial cabinetry where both appearance and repeated grasping are expected. The Belwith Handles and Pulls classification ties it into standard cabinet hardware conventions, so it can be specified alongside hinges and other fittings that follow similar naming and sizing practices. The PRO LUXE SERIES branding positions this pull inside a coordinated line, allowing it to be used wherever a consistent Chalet Series theme is desired throughout a room or across multiple installations.
The defined 128 mm center to center distance on this PRO LUXE SZ34SN pull gives installers a fixed drilling target, which supports use of jigs or templates for repeatable hole placement along a row of doors or drawers. The dual listing of 5-1/16 inch and 128 mm in the product name helps reduce conversion errors when teams work from mixed imperial and metric documentation on the same project. The satin nickel finish called out in both the Web Description and SAP Description standardizes finish selection, so the same visual result is maintained when ordering across phases or by different buyers. The precise manufacturer part number SZ34SN functions as the control reference, helping purchasing, design, and field personnel all refer to the identical handle when planning counts, layouts, or future matching replacements. As a pull within Decorative Hardware and Moldings, it fits into normal cabinet hardware workflows, so measuring, marking, and aligning it follows familiar practices used for other Belwith handles and pulls.
The PRO LUXE Chalet Series SZ34SN pull uses a 5-1/16 inch (128 mm) center to center spacing, which aligns with cabinet fronts drilled on a 128 mm layout for straightforward replacement or new installs.
The satin nickel finish on this pull creates a muted metallic look, helping cabinets present a clean, contemporary style that works with many paint colors and wood tones.
The PRO LUXE Chalet Series SZ34SN is a decorative pull in the Handles and Pulls category, so it is used as the main grasp point on cabinet doors and drawers.
The 128 mm center to center size sets the exact hole spacing, allowing use on cabinet fronts already drilled to that pattern or when laying out new hardware using common jigs.
This pull lists both 5-1/16 inch and 128 mm center to center, describing the same mounting distance so teams working in either unit system reference a single size.
The PRO LUXE Chalet Series designation identifies this pull as part of a coordinated PRO LUXE SERIES line, supporting consistent style across multiple cabinet pieces.
The PRO LUXE Chalet Series 5-1/16 inch (128 mm) center to center satin nickel pull, identified as SZ34SN, offers a defined drilling pattern and neutral finish that support consistent cabinet layouts. Its role in the Handles and Pulls category aligns it with typical door and drawer applications where a reliable grasp point is needed. Choosing this specific 128 mm center to center pull lets projects standardize on one size and finish, simplifying layout decisions across multiple openings and future matching work.
Sold In: 1 Each