PRO LUXE Ironwerks Series pull identifies this as a decorative handle from the PRO LUXE SERIES line, which gives you a consistent look when you are matching other Ironwerks cabinet hardware on a job. The product name specifies a 6-5/16 inch (160 mm) center to center measurement, so the distance between the mounting holes is fixed for use on layouts drilled to that spread. That center to center dimension matters when you are aligning multiple doors or drawers because it keeps handle placement even across a run of cabinets. The web description states that this is a pull, not a knob, so it provides a full hand grip that suits heavier drawers and frequently used doors. The product name and description both confirm a vintage bronze finish, giving projects a darker, traditional metal tone that works well with classic or rustic cabinet styles.
The description states a 160 mm center to center measurement, so the mounting holes are spaced specifically for that metric size, which is important when planning boring patterns on cabinet doors and drawers. The same dimension is also expressed as 6-5/16 inches, giving an imperial reference that aligns with common woodworking layouts that mix inch-based measuring with metric drilling jigs. Because the pull is identified as a handle in the Handles and Pulls category, it is intended to mount with two points of contact, which helps distribute everyday pulling forces along the cabinet front. The clearly defined center to center distance supports repeatable drilling from cabinet to cabinet, helping maintain visual consistency along long banks of doors or drawer stacks.
The product name and web description describe a PRO LUXE Ironwerks Series 6-5/16 inch (160 mm) Center to Center Vintage Bronze Pull, so it is positioned for decorative use on cabinet doors and drawers where appearance and function both matter. Its classification under Decorative Hardware & Moldings and Handles and Pulls shows that it is intended as visible hardware on finished woodworking, not hidden functional hardware. The vintage bronze finish provides a darker tone that suits kitchens, baths, or built-ins that lean toward traditional or old-world styling, letting the hardware read as an intentional design element. Because it is a pull with a defined length, it visually fits medium to wider fronts better than very narrow doors, giving a balanced look when spaced horizontally or vertically on standard cabinetry.
The specified 160 mm center to center spacing gives you a fixed drilling reference that simplifies layout when repeating the same handle across many fronts, helping installers produce straight, aligned rows. The matching 6-5/16 inch reference in the description ties this metric spacing to an imperial reading, which can reduce conversion steps when you are working from inch-based shop drawings. Being part of the PRO LUXE SERIES Ironwerks range lets you coordinate this SZ89VB pull with other pieces from the same family, supporting uniform finishes across doors, drawer banks, and separate cabinet runs. The Belwith product class tag signals that it falls into a standard handles and pulls group, so it fits typical cabinet hardware planning where two-point pulls are used for everyday opening and closing.
The PRO LUXE Ironwerks Series pull has a 160 mm (6-5/16 inch) center to center measurement, which sets the distance between mounting holes for drilling and for matching existing layouts.
The product is defined as a decorative pull in the Handles and Pulls category, so it serves as the graspable handle on cabinet doors and drawers in finished woodworking projects.
The product name lists a vintage bronze finish, giving cabinets a darker, aged-metal appearance that supports traditional or rustic styling choices on visible hardware.
This pull is part of the PRO LUXE SERIES and is described as Ironwerks Series, so it aligns with other PRO LUXE decorative pulls when coordinating hardware across a project.
The 6-5/16 inch figure reflects the overall span that the pull covers visually, helping installers scale the handle to medium or wider cabinet fronts for balanced proportions.
The Handles and Pulls, Belwith classification identifies this as a standard decorative handle, making it suitable wherever a two-point pull is specified on cabinetry.
The clearly defined 160 mm (6-5/16 inch) center to center dimension, the vintage bronze finish, and the PRO LUXE Ironwerks Series identity give this SZ89VB pull a specific role in cabinet projects. When your drawings or existing fronts are set up for a 160 mm spread, this handle aligns with that drilling pattern while presenting a traditional bronze look. The product class under Decorative Hardware & Moldings and Handles and Pulls matches it to visible cabinet use where a full hand grip is needed. Selecting this pull through Wurth Baer Supply ties your cabinet layouts to a named PRO LUXE SERIES component built for decorative use.
Sold In: 1 Each