PRO LUXE Ironwerks pull identifies this piece as part of the PRO LUXE Ironwerks Series, so it matches projects that are already using this decorative hardware line and keeps cabinet runs visually consistent from door to door. The product name specifies a 3-3/4 inch, or 96 mm, center to center measurement, which sets the hole spacing between fasteners and helps align this pull with drilling patterns common in cabinet and furniture layouts. The description lists the finish as vintage bronze, giving the pull a bronze tone that supports traditional or rustic design themes where a darker, aged look is preferred. The item is classified under handles and pulls, Belwith, tying it to a recognized decorative hardware class and allowing installers to group it with other Belwith-style components during layout planning.
The 96 mm center to center measurement defines the mounting hole spacing, so it suits doors or drawers already bored on a 96 mm pattern and supports straightforward swap-out of existing pulls drilled to that layout. The 3-3/4 inch description echoes this spacing in imperial terms, letting installers read cabinet plans in inches while still matching the 96 mm drilling used on many jigs and boring machines. Being identified as a pull within decorative handles and pulls means it is intended for front mounting on cabinet and furniture faces, so layout decisions can focus on stile width and drawer front height around a known pull type.
The product name describes this as a vintage bronze pull, positioning it for cabinets and furniture pieces that call for a bronze-colored handle rather than a bright or chrome look, which supports warm wood tones and traditional door styles. Its 3-3/4 inch, 96 mm, center to center sizing makes it a match for layouts that follow the common 96 mm boring pattern, so it works well on standard-width cabinet doors and many drawer fronts laid out on that grid. As a member of the PRO LUXE Ironwerks Series, it fits projects that already use Ironwerks components, allowing installers to carry the same pull style across kitchen, bath, or shop cabinetry. The handles and pulls, Belwith classification connects it to Belwith decorative hardware conventions, so designers familiar with that class can expect a pull intended for everyday cabinet door and drawer use.
The clearly stated 96 mm center to center dimension supports repeatable setups on boring equipment, because jigs or templates can be locked to that spacing and used across many doors without changing stops. The parallel listing of 3-3/4 inch and 96 mm in the description reduces the chance of layout errors on mixed-dimension drawings, giving both measurements that refer to the same hole spread. The SZ91VB manufacturer part number and HH076011-VB SAP reference tie ordering and shop documentation back to one exact pull, which simplifies maintaining the same style on repair, expansion, or multi-phase cabinet projects. Being described as PRO LUXE Ironwerks Series decorative hardware situates this pull within a defined series, so hardware schedules can call out the series by name and keep installers aligned on which pull goes on which run.
The PRO LUXE Ironwerks Series SZ91VB pull uses a 96 mm, or 3-3/4 inch, center to center size, which sets the hole spacing for mounting on cabinet doors and drawers.
The vintage bronze finish gives the pull a bronze-toned appearance, supporting traditional or warm cabinet designs where a darker metal look is desired on doors and drawers.
This 3-3/4 inch, 96 mm center to center pull is part of the PRO LUXE Ironwerks Series, so it aligns with other Ironwerks decorative cabinet hardware pieces.
The product is classified under decorative hardware and moldings, in the handles and pulls, Belwith class, identifying it as a cabinet pull intended for front-mounted use.
The pull lists both 3-3/4 inch and 96 mm center to center measurements, allowing installers to work with either imperial or metric plans while referencing the same hole spacing.
The SZ91VB manufacturer part number provides a consistent identifier, so shops can reorder the same PRO LUXE Ironwerks pull for future cabinets or match existing installations.
The PRO LUXE Ironwerks Series 3-3/4 inch, 96 mm center to center vintage bronze pull, SZ91VB, combines a defined 96 mm mounting spread with a bronze-tone finish, making it suited to cabinets laid out on a 96 mm drilling pattern where a vintage bronze appearance is specified. For projects built around PRO LUXE Ironwerks cabinet hardware, this pull offers a named series match and a stable SZ91VB identifier that can be referenced on drawings, purchase orders, and future add-on work.
Sold In: 1 Each