PRO LUXE Lakeside Series pull identifies this piece as part of the PRO LUXE SERIES decorative hardware line, so it ties in cleanly when matching other Lakeside Series handles on the same project. The product is classified under Handles and Pulls, Belwith, which positions it as a decorative yet functional cabinet pull for doors and drawers. The named 6-5/16 inch size translates to a pull suited to many medium-width cabinet fronts, giving installers a balanced visual span across the panel. The 160 mm specification in the description defines the center to center measurement, which is the drilling distance that determines where bore holes must be located. The satin nickel finish called out in the description provides a neutral metallic tone that coordinates with many hinge finishes and appliance trims. The SZ143SN manufacturer part number gives a precise identifier for repeat orders or matching across large jobs.
The 160 mm center to center measurement is the core fitting dimension for this satin nickel pull, because it dictates the hole spacing installers use when boring cabinet doors or drawer fronts. The 6-5/16 inch reference in the name echoes this layout in imperial terms, helping translate metric spacing to common shop planning. Being described as a pull within Decorative Hardware & Moldings indicates that it mounts to the cabinet face to provide a grip point, rather than operating internally. The satin nickel finish ties into many standard hinge and appliance shades, so the pull can sit on face frames or frameless fronts without visually clashing. The PRO LUXE SERIES naming and SZ143SN part number allow shops to specify the same fitting pattern whenever replacements or additional matching cabinets are needed.
The 160 mm center to center pull dimension suits cabinet layouts where medium-length hardware looks proportional to the width of the door or drawer, giving enough grip span without crowding the panel edges. Because the product sits in the Decorative Hardware & Moldings category as a handle and pull, it fits well on face-mounted applications in kitchens, baths, and casework where a user needs a handhold to operate fronts. The 6-5/16 inch naming in the PRO LUXE Lakeside Series description communicates a size that aligns with many standard cabinet module widths, supporting uniform hardware placement across a run. The satin nickel finish described in the web and SAP descriptions blends with many contemporary and transitional cabinet styles, so the same pull can be used across mixed door styles while still reading as one coordinated hardware choice.
The clearly stated 160 mm center to center spacing allows shops to program drilling patterns or templates once, then repeat that pattern across doors and drawers for consistent alignment from cabinet to cabinet. The 6-5/16 inch naming in imperial units helps installers on site confirm that the pull length aligns with their design intent when looking at a face frame or slab front, because they can visualize the span quickly against panel dimensions. The satin nickel finish designation ensures the visual outcome stays predictable when coordinating with other satin nickel components specified on the job, reducing the risk of mismatched sheen or tone along a run of cabinetry. The SZ143SN manufacturer part number and H077883SN reference in the SAP description both give precise product identification that supports reordering the exact same pull for future phases or service work. The PRO LUXE Lakeside Series label ties these technical details to a defined series, making it straightforward to maintain the same pull style whenever additional cabinets or built-ins are added later.
The PRO LUXE Lakeside Series pull has a 160 mm center to center size, which sets the hole spacing used when drilling cabinet doors or drawer fronts for consistent mounting.
The product name specifies 6-5/16 inch, indicating the overall span of the satin nickel pull, which helps determine how it will look across the width of each cabinet front.
The SZ143SN pull is described with a satin nickel finish, providing a neutral metallic look that coordinates with many cabinet hinges and nearby metal components.
The product is classified under Decorative Hardware & Moldings and Handles and Pulls, Belwith, identifying it as a face-mounted pull for operating cabinet doors or drawers.
The 160 mm center to center dimension defines the distance between mounting points, which guides drilling templates and supports accurate, repeatable hardware placement on multiple cabinets.
The PRO LUXE Lakeside Series designation and SZ143SN part number identify this pull as part of a defined PRO LUXE SERIES line, supporting consistent style selection across a project.
The PRO LUXE Lakeside Series 6-5/16 inch satin nickel pull combines a defined 160 mm center to center drilling pattern with a neutral finish, which supports clean alignment and visual consistency across cabinet runs. The PRO LUXE SERIES and SZ143SN identifiers create a clear reference when specifying or expanding projects that rely on the same decorative hardware. For cabinet doors and drawers that call for a medium-span handle in satin nickel, this pull from Wurth Baer Supply offers a clearly defined size, finish, and series identity ready for straightforward layout and installation.