Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Kreg Crosscut Station KMA4100 is a guided cutting station that pairs with a circular saw to deliver miter saw style crosscuts and angle cuts. It crosscuts boards up to 12 inches wide at 90 degrees, so wider stock can be handled in one pass for accurate repeat work. The station allows a variety of miter cuts from 0 to 45 degrees using an adjustable fence with molded-in angle alignments, helping you dial in common angles without extra layout. An MDF base and Sure Cut backboard create a sacrificial cutting surface that supports the fibers during the cut so edges stay cleaner. That MDF base also forms a visible kerf line that matches the saw path, giving a clear visual reference of where the blade will travel on every cut.
The crosscut up to 12 inch wide capacity at 90 degrees lets the station handle shelving, face-frame parts, and wider trim without changing tools, which helps maintain a steady workflow. Using the adjustable fence with angle markings from 0 to 45 degrees, you align the work against the fence and follow the molded indicators, so the circular saw tracks along a predictable line for angle cuts. The MDF base working as both sacrificial surface and kerf line keeps the work supported right at the blade while providing a visible track, which helps you position your marks exactly where the saw will cut. Material support wings and detachable blocks extend out from the main body to carry the piece and the offcut, so longer workpieces remain level through the cut.
This Kreg cutting station is designed to pair with a circular saw so you can perform crosscuts and angle cuts on boards that might otherwise be handled on a miter saw. By supporting crosscuts up to 12 inches wide at 90 degrees, it fits tasks like trimming wider boards or components within that range for cabinetry or built-ins. The adjustable fence and molded-in angle alignments from 0 to 45 degrees let you set common miters without extensive measuring, which suits repeatable trim or component cuts. Material support wings and detachable blocks extend under long boards and their offcuts, so the work stays supported during the cut path, helping keep the saw travel steady while managing longer stock. The compact design stays easy to store between tasks and to carry to different work areas when accurate crosscuts and angle cuts are needed in multiple locations.
The MDF base acting as a sacrificial surface and forming a kerf line directly under the saw path means each pass cuts into the same reference zone, which helps maintain a clean edge and a consistent visual track for aligning future cuts. The Sure Cut backboard works with the base to support fibers at the cut line, so edges are backed up during the cut for reduced splintering along the finished side. With molded-in angle alignments on the adjustable fence, you rely on integrated markings rather than separate gauges, which supports repeatable miters from 0 to 45 degrees once you dial in the angle you need. Crosscutting up to 12 inches wide at 90 degrees expands what a circular saw can do on the station, so you keep more cuts within one setup rather than shifting to another tool. The material support wings and detachable blocks extend only when needed, then tuck back when they are not in use, which helps keep the working footprint compact while still supporting longer material when the job calls for it.
Kreg Crosscut Station KMA4100 turns a circular saw into a guided crosscut and miter setup, enabling miter saw style cuts with a defined path and integrated angle references.
The station crosscuts boards up to 12 inches wide at 90 degrees, allowing wider stock within that range to be trimmed in a single guided pass.
The adjustable fence with molded-in angle alignments supports miter cuts from 0 to 45 degrees, so you can set and repeat common angle cuts.
The MDF base acts as a sacrificial surface and creates a kerf line, backing the workpiece to reduce splintering while clearly showing where the blade will cut.
The Sure Cut backboard works with the MDF base as a sacrificial support behind the cut line, helping produce splinter-free cutting results along the finished edge.
Material support wings with detachable blocks extend to support long boards and offcuts, keeping pieces level so the saw can track smoothly through the cut.
The Kreg Crosscut Station KMA4100 offers guided circular saw cutting with crosscuts up to 12 inches wide at 90 degrees and miter cuts from 0 to 45 degrees, supported by an MDF kerf line base and Sure Cut backboard. For projects where accurate crosscuts, clean edges, and repeatedly set angles are important, this compact station provides a defined path and integrated material support wings. Select this station when you want miter saw style accuracy from a circular saw in a setup that is quick to set and easy to store between jobs.
Sold In: 1 Each