
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Kreg Straight Edge Guide XL lets you make perfectly straight cuts up to 8 feet in sheet goods, so large plywood or panel breakdown stays controlled from the first cut. The guide works with material up to 8 feet, which allows full-sheet crosscuts and rip cuts on common sheet sizes without re-positioning work. Guided cutting helps you see exactly where you will cut, reducing guesswork along the cut path. The tool works with circular saws, jigsaws, and trim routers, giving flexibility to match the guide to the tool already in your workflow. It works with most brands, which keeps crews from being locked into one specific saw or router. The guide belongs in Bits, Blades and Cutters under Saw Blades for cutoff and crosscut tasks, so it fits naturally into cutting stations focused on accurate straight-line work.
The Straight Edge Guide XL aligns quickly by matching its edge to your cut marks, using the cutline indicators to reference the exact saw path, so layout transfers cleanly to the work. The aluminum guide rail provides a physical track for the saw shoe, helping the tool stay square to the edge while moving along the sheet. Built-in Grip Maxx clamps secure the guide to the workpiece from a low profile, so clamping does not interfere with the saw body or restrict travel. The guide works with left- and right-blade circular saws, which simplifies setup whether the saw motor housing sits to either side of the line. It also works with some jigsaws, extending the same straight reference to curved-cut tools where a straight edge start is critical.
The Kreg Straight Edge Guide XL is designed for sheet goods up to 8 feet, so it suits full-sheet plywood, MDF, and similar panel products in shop or jobsite environments. Crosscut and rip cut capability up to 8 feet lets the same guide handle sizing panels to length and ripping strips, which keeps setups consistent through a project. The guide belongs to the cutoff and crosscut category under saw blades, positioning it as a solution for straight-line cuts rather than freehand trimming. Because it works with circular saws, it adds straight-cut capability to common handheld saws already present on most jobs. Compatibility with some jigsaws and trim routers means the same straight reference can also guide plunge or finish passes along the same line.
The aluminum guide rail leads the saw along a fixed path, which reduces lateral wandering and helps edges stay straight over the full 8-foot run. Cutline indicators show exactly where you will cut, so once the indicators are aligned to layout marks, the kerf follows that plan and part sizes stay consistent. Built-in Grip Maxx clamps hold the guide to the material, so the reference edge does not shift partway through a cut when handling large sheets. Guided cutting makes it easier to see exactly where you will cut, giving a clear visual connection between marks and blade path. Working with left- and right-blade circular saws keeps the blade near the guide regardless of saw orientation, which supports repeatable setups across different tools on the same crew. Using one guide for circular saws, some jigsaws, and trim routers keeps the cutting reference unified from rough breakdown through final edge work.
The Kreg Straight Edge Guide XL supports straight cuts up to 8 feet in sheet goods, so full-size panels can be crosscut or ripped in a single guided pass.
The Straight Edge Guide XL Kreg KMA4700 works with circular saws, jigsaws, and trim routers, so one guide can support different cutting tools on the same project.
The Straight Edge Guide XL works with left- and right-blade circular saws, so the same guide can be used regardless of blade orientation on the saw.
The Straight Edge Guide XL cutline indicators show exactly where you will cut, translating layout marks into a visible blade path for accurate part sizing.
The Straight Edge Guide XL uses low-profile Grip Maxx clamps to secure the guide to the material, keeping the rail stable while the saw moves along the cut.
The Straight Edge Guide XL aluminum guide rail provides a straight, rigid edge that leads the saw shoe, helping long cuts stay true across sheet goods.
The Kreg Straight Edge Guide XL KMA4700 provides guided cutting up to 8 feet in sheet goods, so one setup handles both crosscuts and rip cuts on large panels. Aluminum guide rail construction directs the saw along a straight path, while cutline indicators tie the blade path to layout marks. Built-in Grip Maxx clamps secure the guide to the workpiece through the entire cut, holding alignment steady on full sheets. Because it works with circular saws, some jigsaws, and trim routers, the same reference edge supports multiple cutting and routing steps. Select this guide when the workflow calls for straight, predictable cuts on sheet goods using the tools already in your kit.
Sold In: 1 Each