
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Grass Kinvaro T-Slim lift-up flap fitting is a flush inset system for fronts made from wood, so it supports clean, modern cabinet lines while keeping the front flush with the cabinet. The fitting is designed specifically as a lift-up flap, so the front moves upward, clearing the work area in use. Its flush inset design targets high design requirements, so it suits projects where front alignment and visual uniformity matter as much as function. Being part of the Grass Kinvaro Lift Systems range links it to a proven lift system family, which helps align it with other Kinvaro solutions on a job. Cover caps and adapters in Stone, Ice, and Silver give finish choices at the side of the cabinet, helping the mechanism blend with different interior and hardware colors. The Stone option used here keeps the visible parts coordinated in that color family.
The T-Slim lift-up flap fitting uses a milling depth of 12.2 mm in the cabinet side, which defines how deep to route the side panel to seat the mechanism. A milling depth of 13.7 mm in the front sets the pocket required in the wooden flap, helping it sit correctly with the flush inset layout. Convenient adjustment of the spring force is built into the system, so installers can tune lift behavior to the chosen flap weight within the power factor range. Fast, tool-free clip fitting of the front allows the flap to be attached or removed without tools, which speeds mounting and simplifies later adjustments. The flap offers 3-dimensional adjustment of height plus or minus 2.5 mm, side plus or minus 2.0 mm, and depth +3.0 mm / -1.0 mm, giving fine control over reveal lines and inset alignment after installation.
The T-Slim lift-up flap fitting is defined for fronts made from wood in an inset configuration, so it suits cabinetry where the door front sits inside the frame or carcass rather than overlaying it. This flush inset approach supports high design requirements, where tight reveal lines and minimal projection are part of the specification. With a 107 degree opening angle, the flap moves well clear of the cabinet opening, which helps provide access to the interior for loading, unloading, or viewing contents. The integrated opening angle reduction clip can optionally limit this to 75 degrees, which is useful in installations beneath ceilings, soffits, or shelves where full travel could contact surrounding structures. Low opening forces paired with a multi-position stop make the flap practical for repetitive operation, as the user can lift smoothly and leave it at a convenient angle without constant hand support.
The flap on the Kinvaro T-Slim system provides 3-dimensional adjustment in height, side, and depth, so installers can dial in the inset front to achieve consistent gaps from cabinet to cabinet. Height adjustment of plus or minus 2.5 mm allows vertical tuning to align the top edges across a run of flaps or with adjacent doors. Side adjustment of plus or minus 2.0 mm supports even vertical reveals between neighboring fronts, which matters when combining several lift units in one elevation. Depth adjustment of +3.0 mm / -1.0 mm lets the front sit correctly within the carcass, refining how flush the face appears with the cabinet sides. The version with integrated damping delivers soft-close behavior, and the damper can be switched on or off, giving flexibility to tailor closing feel. An alternate version with an integrated automatic opening system, Tipmatic Plus, supports push-to-open behavior when that motion is specified in the design.
The Grass Kinvaro T-Slim lift-up flap fitting is designed for fronts made from wood in an inset layout, so it targets wooden flaps that sit flush within the cabinet opening.
The 107 degree opening angle lets the wood flap move well above the access area, so users gain clear reach into the cabinet without the front hanging directly over the opening.
The integrated opening angle reduction clip can be activated to reduce the opening from 107 degrees to about 75 degrees, helping in installations with overhead obstructions.
The specified milling depths of 12.2 mm in the cabinet side and 13.7 mm in the front define the routed pockets, so the mechanism and flap sit correctly for a true flush inset look.
The flap allows height adjustment plus or minus 2.5 mm, side adjustment plus or minus 2.0 mm, and depth adjustment of +3.0 mm / -1.0 mm to fine-tune reveals and inset depth.
The version with integrated damping provides soft-close action on the flap, and the damper can be switched on or off to match the desired closing feel for the installation.
Grass Kinvaro T-Slim lift-up flap fitting for fronts made from wood combines flush inset design with defined milling depths, so routing and alignment follow clear dimensions. Its low opening forces, multi-position stop, and 107 degree opening angle support repeatable daily use in kitchens or casework. Three different power factors and adjustable spring force help tune the lift to the weight and size range of the specified wooden flaps between 500 and 1100 application demands. With 3-dimensional adjustment and color-matched Stone cover caps, this Kinvaro Lift Systems T-Slim set supports precise reveals while keeping visible hardware in the chosen finish. For projects demanding clean inset fronts and controlled motion, this T-Slim configuration from Grass America offers the defined geometry and adjustment range needed to execute the design intent.
Sold In: 1 Set
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Set | GFF161149020204 Mfr# F161149020204 | Grass Kinvaro T-Slim Adapter Set Screw-On, Stone |