Grass Kinvaro T-Slim Set Soft-Close Silver 1000-2250 Power Factor

Grass Kinvaro T-Slim Set Soft-Close For Wood Fronts

Grass Kinvaro T-Slim Set Soft-Close is a lift-up flap fitting designed for fronts made from wood in inset applications, so it supports clean, flush cabinet fronts while keeping the mechanism concealed in the cabinet side. This flush inset flap fitting is built for high design requirements and maximum storage space, so the hardware stays out of the way of the interior while the front moves cleanly. A cabinet side milling depth of 12.2 mm and front milling depth of 13.7 mm define the material removal, which helps plan machining and keep the fitting seated solidly. Low opening forces let the flap lift with minimal effort, which helps during frequent access. The part is silver, so it blends easily with common interior and hinge finishes.

Key Kinvaro T-Slim Details That Support Workflow

• The flush inset flap design maintains maximum storage space behind the front, which helps when every millimeter of interior depth matters in upper cabinets.
• Low opening forces work with the lift-up motion, so the front moves smoothly without fighting the hardware during daily use or adjustments.
• The multi-position stop holds the flap in several positions, which helps set convenient access angles for working at the cabinet.
• Convenient adjustment of the spring force lets the installer tune the lift behavior, which supports consistent motion across fronts of different weights.
• Fast, tool-free clip fitting of the front speeds installation, which helps during multi-cabinet runs or on-site replacement work.
• Cover caps and adapters in Stone, Ice, and Silver that can be painted support matching visible parts to the cabinet design.

Lift-Up Flap Mounting And Adjustment Details

This T-Slim lift-up flap fitting uses a clip fitting of the front, so the fascia can be attached and removed without tools once the mechanism is in place. The flap offers 3-dimensional adjustment of height plus or minus 2.5 mm, side plus or minus 2.0 mm, and depth +3.0 mm / -1.0 mm, so the front can be aligned precisely in the opening. A 107 degree opening angle gives generous access above the front, while the integrated opening angle reduction clip, optionally activated to 75 degrees, helps match the motion to nearby obstructions or design limits. Three different power factors are available in the series, so the spring force adjustment can be coordinated with the front size and weight range.

Where Kinvaro T-Slim Fits And Why Details Matter

Flush Inset Wood Fronts With Lift-Up Motion

This T-Slim lift-up flap fitting is designed for fronts made from wood in inset applications, so it suits cabinets where the front sits flush within the frame or side panels while lifting upward. The flush inset flap fitting layout supports high design requirements, because the mechanism sits in milled pockets with a cabinet side milling depth of 12.2 mm and a front milling depth of 13.7 mm, keeping hardware largely hidden. By preserving maximum storage space, the system allows deeper usable interior volume behind the lifted front, which is valuable in upper wall cabinets or overhead units. The silver finish provides a neutral interior appearance that coordinates with many hinge and drawer system tones, supporting a consistent hardware look across the project.

Adjustment, Motion Control, And Opening Angle Benefits

The Kinvaro T-Slim lift system offers low opening forces and a multi-position stop, so the front moves easily and can rest at several angles during use. Convenient adjustment of the spring force lets the installer dial in how positively the flap lifts and stays, which is important when matching different front weights within the specified power factor range. Flap adjustment in three dimensions - height plus or minus 2.5 mm, side plus or minus 2.0 mm, and depth +3.0 mm / -1.0 mm - supports precise reveals and flush alignment with surrounding fronts, reducing time spent on fine-tuning. A 107 degree opening angle gives ample headroom when fully opened, while the integrated opening angle reduction clip, which can optionally be activated to 75 degrees, lets the motion be limited when overhead clearances or adjacent components demand a smaller sweep. Versions with integrated damping provide soft-close that can be switched on or off, which lets the motion be set either for cushioned closing or for free movement. Versions with an integrated automatic opening system, Tipmatic Plus, allow a different operating concept, so projects can standardize on either soft-close or Tipmatic Plus based on functional requirements.

Common Questions About This Kinvaro T-Slim Set

Choose This Kinvaro T-Slim For Precise Lift Fronts

This Kinvaro T-Slim lift-up flap fitting from Grass America combines a flush inset layout with low opening forces, multi-position stop, and spring force adjustment, so wood fronts can lift smoothly and align cleanly. With 3-dimensional adjustment and a selectable 107 or 75 degree opening angle, the system supports tight reveals and controlled motion in overhead cabinets. Selecting the appropriate version with either integrated soft-close damping or Tipmatic Plus automatic opening lets the project match its preferred operating style while keeping the same T-Slim design language.