Grass Kinvaro T-Slim Set Soft-Close Ice 1000-2250 Power Factor

Grass Kinvaro T-Slim Set Soft-Close Lift System

Grass Kinvaro T-Slim set is a lift-up flap fitting designed for inset wood fronts, so it supports flap doors where a flush, clean front is required on cabinets. The T-Slim lift-up flap fitting creates a flush inset flap fitting for high design requirements and maximum storage space, helping keep interior space clear because the fitting installs into shallow milled pockets. A milling depth of 12.2 mm in the cabinet side and 13.7 mm in the front allows the fitting to sit recessed, which helps maintain the slim visual line of the cabinet. Low opening forces work with the internal spring system so the flap can be moved with controlled effort. Multi-position stop capability lets the flap stay in various open positions, which supports comfortable access during use.

Key Kinvaro T-Slim Details For Cabinet Projects

• The T-Slim lift-up flap fitting is designed for fronts made from wood (inset), which suits cabinet projects where the flap front sits inside the frame for a flush appearance.
• The flush inset flap fitting design supports high design requirements and maximum storage space, so cabinets keep a minimal look while preserving internal volume around the hardware.
• The milling depth of 12.2 mm in the cabinet side houses the mechanism within the side panel, helping the hardware sit nearly invisible along the interior wall.
• The milling depth of 13.7 mm in the front allows the front component to recess into the flap, supporting a flat exterior surface without protruding arms.
• Low opening forces combined with a multi-position stop support controlled movement of the flap, which helps during frequent opening cycles in work areas.
• Convenient adjustment of the spring force lets installers tune the lifting behavior to match the flap weight within the supported power factor range.

Lift-Up Installation And Front Adjustment Control

Fast, tool-free clip fitting of the front lets installers attach the flap to the mechanism without separate fastening tools at that step, saving time during runs of similar cabinets. Flap with 3-dimensional adjustment of height plus or minus 2.5 mm, side plus or minus 2.0 mm, and depth +3.0 mm / -1.0 mm gives precise control over the gap pattern around the front, helping align neighboring fronts and frames. A 107 degree opening angle provides wide access to the cabinet interior, which supports overhead reach into storage. The integrated opening angle reduction clip with optional activation to 75 degrees allows the opening range to be limited when needed for nearby walls or shelving.

How This Kinvaro Lift System Performs In Use

Where This Flush Inset Flap Fitting Works Best

The flush inset flap fitting for high design requirements and maximum storage space is suited to cabinet runs where a level front plane is important, because the flap front aligns inside the cabinet frame. Fronts made from wood (inset) can be milled to 13.7 mm depth to accept the mechanism, so solid or engineered wood flaps become part of a continuous design concept. A milling depth of 12.2 mm in the cabinet side creates space to recess the side component, keeping the inner cabinet clear for storage or shelving near the sidewall. Three different power factors are available within the Kinvaro T-Slim set family, so the lift system can match various flap sizes and weights inside the 1000-2250 power factor range stated for this set. Cover caps and adapters in Stone, Ice, and Silver give options to match the hardware appearance to the cabinet interior, and all cover caps can be painted, which helps coordinate the mechanism color with custom finishes.

Adjustment Features That Support Accurate Results

Convenient adjustment of the spring force allows the lift system to be tuned after installation, so the flap movement can be set for the selected front size within the supported power factor range. Flap with 3-dimensional adjustment of height plus or minus 2.5 mm is valuable for aligning the top and bottom reveal lines across several cabinets. Side adjustment of plus or minus 2.0 mm helps correct small drilling or milling tolerances so vertical gaps between neighboring fronts can be matched. Depth adjustment of +3.0 mm / -1.0 mm provides control over how the flap sits relative to the cabinet front edge, which supports a consistent flush inset position. Low opening forces paired with a multi-position stop keep the flap comfortably positioned during partial opening, useful when working at benches or counters. With integrated damping (soft-close, damper can be switched on/off), the closing motion can be controlled at the hinge side, helping the flap settle gently into the cabinet frame. An integrated automatic opening system version (Tipmatic Plus) is also part of the T-Slim range, offering an alternative opening style where a mechanical touch trigger is preferred.

Practical Questions About This Grass Kinvaro T-Slim

Selecting This Kinvaro T-Slim Set For Your Job

This Grass Kinvaro T-Slim set soft-close lift-up flap fitting in Ice color supports flush inset wood fronts while preserving storage space through shallow milling depths in the side and front. The 1000-2250 power factor, convenient spring force adjustment, and 3-dimensional flap alignment features give installers control over flap movement and reveal lines across a run of cabinets. For cabinet projects using Grass Kinvaro lift systems where a slim, recessed mechanism is required, this F151149010201 T-Slim set provides the functional and visual details needed to match demanding design layouts.