Rev-A-Shelf 4KCCB Series 16-1/2"W Maple Cutting Board Drawer, Door Mount - 4WCCB-419HFLSC-1

Choose a Rev-A-Shelf cutting board drawer

Rev-A-Shelf cutting board drawer gives you a dedicated food prep surface inside the cabinet while helping route scraps toward a waste container. This wood drawer system is made from natural maple and arrives fully assembled with TANDEM slides and BLUMOTION soft-close. The Rev-A-Shelf drawer is designed for a face frame base 18 inch cabinet with a 15 inch opening, and adjustable door mount brackets are included and required for operation. A removable cutting board and removable polymer funnel insert support cleaner prep work. For buyers comparing a soft-close cutting board drawer, this unit combines full-extension drawer slides, a reversible board, and a built-in chute concept in one kitchen cabinet accessory drawer.

See how this maple cutting board drawer helps

• Natural maple construction with clear coat finish - The Rev-A-Shelf wood drawer system provides a durable prep surface and a finished wood interior suited to cabinet installations.
• Fully assembled drawer system - The maple cutting board drawer reduces setup time for installers replacing an existing drawer.
• TANDEM slides with BLUMOTION soft-close - The soft-close cutting board drawer closes smoothly and helps limit slamming during daily kitchen use.
• 110 lb full-extension slides - Full-extension drawer slides give better access to the drawer contents and the cutting board area.
• Reversible wood cutting board - The removable cutting board can be oriented as needed for prep workflow and cleaning.
• Cut-out board with removable polymer funnel insert - The cutting board drawer with chute lets food scraps move toward a waste container sold separately.
• Adjustable door mount brackets included - The door mount cutting board drawer is built for attached door operation and allows alignment during installation.
• Designed for a face frame base 18 inch cabinet with 15 inch opening - This face frame base cabinet cutting board drawer gives buyers a clear starting point for cabinet fit checks.
• Drawer dimensions of 16-1/2 inch W x 21-21/32 inch D x 4-5/16 inch H - The listed size helps confirm whether the kitchen cabinet accessory drawer will replace your current drawer correctly.

Confirm fit for your door mount cutting board drawer

Key specs to confirm: This door mount cutting board drawer measures 16-1/2 inch wide x 21-21/32 inch deep x 4-5/16 inch high. Rev-A-Shelf states it is designed for a face frame base 18 inch cabinet with a 15 inch opening. Because this unit replaces your entire existing drawer, confirm cabinet opening width, interior depth, face frame conditions, and door attachment clearance before ordering. The product uses TANDEM full-extension BLUMOTION slides and adjustable door mount brackets that are required for operation. A 110 lb slide rating is provided. If you need any additional load, compliance, or installation detail not listed here, confirm it with the manufacturer or technical documentation.

What's included: One cut-out cutting board drawer, one removable cut-out cutting board, one removable funnel insert, and mounting hardware with slides.

What to verify before ordering: Check that your cabinet is a face frame base 18 inch cabinet, that the opening is 15 inches, that your available depth supports the listed drawer depth, and that your door can be mounted to the included adjustable brackets. Also confirm that you have or plan to add a compatible waste container, since the waste container is sold separately.

Use a cutting board drawer with chute

Handle prep scraps with less mess

A cutting board drawer with chute is useful when the goal is to keep prep work close to the cabinet and reduce extra trips across the kitchen. In a remodel or replacement project, an installer may need a door mount cutting board drawer that takes the place of an existing drawer while adding a dedicated prep surface. This Rev-A-Shelf cutting board drawer is built for that kind of application because it replaces the entire drawer and arrives fully assembled.

The removable cutting board has a cut-out section and a removable polymer funnel insert. That layout helps direct peels, trimmings, and small food scraps down toward a waste container below. The waste container is sold separately, so buyers should confirm the cabinet layout and trash setup they plan to use. For many kitchens, that means checking whether the cabinet below or behind the prep area can support the intended scrap path without interference.

This maple cutting board drawer also fits buyers who want smoother drawer travel and quieter closure. TANDEM slides with BLUMOTION soft-close and full-extension drawer slides support access to the full drawer area. The reversible board adds flexibility during prep and cleaning. If your current drawer front needs to operate with the new assembly, the included adjustable door mount brackets matter because they are required for operation. Before ordering, confirm face frame cabinet construction, the 15 inch opening, and available depth against the listed 21-21/32 inch drawer depth.

Compare this wood drawer system with standard drawers

Compared with a standard drawer box, this wood drawer system is built around a specific kitchen task. A basic drawer may store utensils or wraps, but it does not provide a removable prep board, a cut-out opening, or a funnel insert for scrap handling. Buyers choosing between a regular replacement drawer and a purpose-built kitchen cabinet accessory drawer should focus on workflow, not just size.

This Rev-A-Shelf unit also differs from simple wood drawers because the door mount brackets are part of how the drawer operates. That makes fit and door alignment more important during planning. The fully assembled construction can simplify installation steps for professionals and serious DIY buyers, while the natural maple build and clear coat finish provide a finished interior appearance. Full-extension travel and BLUMOTION soft-close also matter for users who want the drawer to open fully and close in a controlled way.

When comparing options in this product type, practical questions carry more weight than broad marketing claims. Confirm whether the drawer is meant to replace the whole existing drawer, whether the board is removable, whether the scrap opening is built in, and whether the cabinet type matches the product design. On those points, the verified details for this Rev-A-Shelf cutting board drawer are clear: it is a fully assembled maple drawer system with a reversible removable board, removable funnel insert, soft-close full-extension slides, and fit guidance for a face frame base 18 inch cabinet with a 15 inch opening.

Ask fit questions before buying this wood drawer system

Order the right Rev-A-Shelf cutting board drawer

Rev-A-Shelf cutting board drawer is a cabinet upgrade aimed at buyers who want a removable prep board, a built-in scrap chute, and soft-close full-extension operation in one assembly. You get the fully assembled maple drawer, reversible removable cutting board, removable funnel insert, slides, and mounting hardware. Before purchase, confirm the face frame base 18 inch cabinet requirement, the 15 inch opening, the listed drawer dimensions, and your door mounting conditions. Also verify your waste container plan, since that item is sold separately.