Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Rev-A-Shelf 4WTCDD series cutlery drawer brings tiered, deep-profile organization to a 33-inch-wide face-frame cabinet, rolling out on full-extension, soft-close slides so every utensil is within reach.
A standard single-tier cutlery drawer forces everything into one shallow plane, which means ladles, spatulas, and serving spoons either stick out over the front or get piled on top of the flatware. The 4WTCDD's tiered profile solves that by giving cooking tools their own lower channel while the upper tier keeps everyday cutlery flat and sorted. In a wide kitchen with a 33-inch base cabinet, that translates to a drawer that can handle the full range of a busy kitchen's utensils in a single organized pull.
The drawer box is solid maple, a hardwood that takes stain or paint well and holds up to daily use without warping or racking. The 8-1/32-inch overall height gives the tiered interior enough room to accommodate deeper items in the lower section. Powering the motion are Blum soft-close, full-extension slides, which are among the most specified slides in cabinet work for their consistent damping and precise travel. The drawer extends fully so nothing is lost at the back, and the soft-close mechanism takes over in the final inches so it closes quietly under its own action.
This drawer is built specifically for face-frame cabinetry with a 33-inch minimum opening width and at least 22-1/4 inches of usable depth. It suits a kitchen remodel or custom cabinet build where the base cabinet is wide enough to warrant a tiered configuration rather than a standard single-level tray. Cabinet shops speccing large kitchens, designers planning a custom cutlery layout, and homeowners upgrading an oversized junk drawer will all find the width and depth pairing useful. The non-handed design means it installs regardless of door swing direction.
The 4WTCDD is the tiered deep-drawer version. It has a deeper profile and a two-level interior that accommodates taller utensils in the lower tier alongside standard flatware in the upper tier. The 4WTCD series is a single-level cutlery tray.
It needs a minimum cabinet opening of 33 inches wide and 22-1/4 inches deep, with at least 8-1/4 inches of height clearance. All three dimensions need to be met for the drawer to fit and travel correctly.
This drawer is sized and specified for face-frame cabinet construction. If your project uses frameless cabinetry, check the remaining 4WTCDD family for frameless-compatible sizing before ordering.
The maple drawer box can be stained or painted to coordinate with the surrounding cabinetry. It ships unfinished, so finishing is done on-site to match the project.
Specify this drawer where a 33-inch face-frame base cabinet has more to store than a flat tray can sort, and where quiet, full-extension Blum slides are part of the build standard.
Sold In: 1 Each