Pro Value PRO Basic Series pull uses a 128 mm center to center dimension, so installers can match standard drill patterns on many cabinetry layouts without reworking hole spacing. The aluminum construction creates a light handle that is straightforward to position during layout and fastening. The satin champagne finish provides a muted metallic look that coordinates with cabinetry where a soft, warm tone is needed without high reflectivity. Overall length of 5-13/16 inches gives enough hand contact area for drawers and doors while staying proportional on mid-size fronts. A projection of 1-1/16 inches sets the grip away from the surface so fingers clear the door face during use, helping doors and drawers open without knuckle contact. The 1/4 inch width keeps the profile slim, supporting a clean visual line across multiple fronts in a run.
The 128 mm center to center measurement sets a repeatable drilling dimension, so installers can use the same jig or template position across every front. With a 5-13/16 inch overall length, the pull overhangs the posts slightly, which helps hide minor drilling variances along the panel. The 1-1/16 inch projection pulls the hand area off the cabinet face, improving clearance when mounted near frame edges. A 1/4 inch width defines a slim bar, so it can be aligned near panel edges without visually dominating narrower drawer fronts. Screw size of 8-32 x 1 inch matches a common cabinet fastener thread, simplifying selection when matching to standard cabinet constructions.
This Pro Value PRO Basic Series arch pull works within the Decorative Hardware & Moldings category for handles and pulls, so it suits cabinet doors and drawers that require a defined grip point. The 128 mm center to center spacing aligns with many modern cabinet layouts where a metric drilling pattern is preferred, helping maintain uniform spacing along banks of doors. With a 5-13/16 inch length, the pull installs comfortably on medium-width drawers or doors, giving balance between hardware size and panel scale. The satin champagne finish pairs with cabinet surfaces where a warm metallic accent is desired, supporting visual continuity across kitchens, baths, or shop furniture using similar tones.
The aluminum material keeps each pull light, which reduces stress on the door or drawer panel during repeated use. The 1-1/16 inch projection moves the gripping surface outward, allowing fingers to wrap fully behind the pull so drawers can be pulled straight out without sliding contact along the front. A 1/4 inch narrow width lets installers position the pull closer to edges or stile lines while still leaving space around it for finishing and cleaning. The arch form described in the product description creates a curved grip, which offers a natural hand position when opening heavier fronts. Using the SZARCH128-SCP part number ties these dimensions and finish to a specific item, supporting consistent selection whenever additional matching pulls are needed on later projects.
The pull has a 128 mm center to center, 5-13/16 inch overall length, 1-1/16 inch projection, and 1/4 inch width, which guides drilling layout and how far it stands off the cabinet face.
The 128 mm center to center spacing sets a fixed distance between mounting holes, allowing repeatable drilling or reuse of existing holes on cabinet doors and drawers using that pattern.
The 1-1/16 inch projection moves the grip away from the cabinet surface, giving finger clearance so doors and drawers can be pulled open without scraping against the front.
The satin champagne finish offers a soft metallic tone with low sheen, so hardware reads as a warm accent that coordinates with many cabinet colors without strong glare.
The aluminum construction keeps the pull relatively light, which eases handling during installation and reduces weight on cabinet fronts through repeated opening and closing.
The SZARCH128-SCP part number designates this specific Pro Value PRO Basic Series pull with 128 mm center to center, satin champagne finish, and the listed dimensions for consistent matching.
The Pro Value PRO Basic Series 5-1/16 inch center to center satin champagne pull combines aluminum construction with a 128 mm drilling pattern, supporting efficient hardware layout on cabinet jobs. Its 5-13/16 inch length, 1-1/16 inch projection, and 1/4 inch width set a balanced grip profile for doors and drawers. With the satin champagne finish defined in the product data, this pull matches projects calling for a warm metallic tone across multiple fronts. Using the SZARCH128-SCP identifier through Wurth Baer Supply keeps future orders aligned to this exact handle when expanding or updating an installation.